Category: 626-01-7

Organic iodides are used in veterinary products (Organic Iodide Powder) as a nutritional source of iodine. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline. In the chemical industry, alkyl iodides serve as excellent alkylating agents and, specifically, methyl iodide is used as a methylating agent in the synthesis of various pharmaceutical drugs. SDS of cas: 626-01-7.

Pathak, Pratima;Sarycheva, Anastasia;Baird, Matthew A.;Shvartsburg, Alexandre A. research published 《 Delineation of Isomers by the ¹³C Shifts in Ion Mobility Spectra》, the research content is summarized as follows. Mass spectrometry (MS) and isotopes were intertwined for a century, with stable isotopes central to many MS identification and quantification protocols. In contrast, the anal. separations including ion mobility spectrometry (IMS) largely ignored isotopes, partly because of insufficient resolution We recently delineated various halogenated aniline isomers by structurally specific splitting in FAIMS spectra. While this capability hinges on the ¹³C shifts, all preceding studies leveraged ³⁷Cl or ⁸¹Br to enhance the differentiation. However, such abundant heavy isotopes are absent from typical organic compounds With single I isotope, iodinated organics generate similar isotopic envelopes dominated by the ¹³C atoms. Here, we distinguish the three monoiodoaniline isomers based on the shifts solely for one or two ¹³C atoms. The differentiation may be somewhat improved using multipoint peak position descriptions for more reproducible shifts. The interisomer order of shifts differs from those for chlorinated or brominated analogs, showcasing the specificity of approach. We also investigated the mass scaling of isotopic shifts, encountering divergent trends for different structural families.

SDS of cas: 626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., 626-01-7.

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Organic iodides are organic compounds containing a carbon-iodine (C-I) bond. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline.The carbon-iodine bond is weaker than other carbon-halogen bonds due to the poor electronegative nature of the iodine atom. Name: 3-Iodoaniline.

Pflegr, Vaclav;Horvath, Lilla;Stolarikova, Jirina;Pal, Adrian;Kordulakova, Jana;Bosze, Szilvia;Vinsova, Jarmila;Kratky, Martin research published 《 Design and synthesis of 2-(2-isonicotinoylhydrazineylidene)propanamides as InhA inhibitors with high antitubercular activity》, the research content is summarized as follows. Based on successful antitubercular isoniazid scaffold we have designed its “mee-too” analogs by a combination of this drug linked with substituted anilines through pyruvic acid as a bridge. Lipophilicity important for passive diffusion through impenetrable mycobacterial cell wall was increased by halogen substitution on the aniline. We prepared twenty new 2-(2-isonicotinoylhydrazineylidene)propanamides that were assayed against susceptible Mycobacterium tuberculosis H₃₇Rv, nontuberculous mycobacteria, and also multidrug-resistant tuberculous strains (MDR-TB). All the compounds showed excellent activity not only against Mtb. (min. inhibitory concentrations, MIC, from ≤0.03μM), but also against M. kansasii (MIC ≥2μM). The most active mols. have CF₃ and OCF₃ substituent in the position 4 on the aniline ring. MIC against MDR-TB were from 8μM. The most effective derivatives were used for the mechanism of action investigation. The treatment of Mtb. H₃₇Ra with tested compounds led to decreased production of mycolic acids and the strains overproducing InhA were more resistant to them. These results confirm that studied compounds inhibit the enoyl-acyl carrier protein reductase (InhA) in mycobacteria. The compounds did not show any cytotoxic and cytostatic activity for HepG2 cells. The amides can be considered as a promising scaffold for antitubercular drug discovery having better antimicrobial properties than original isoniazid together with a significantly improved pharmaco-toxicol. profile.

626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., Name: 3-Iodoaniline

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Iodide is one of the largest monatomic anions. It is assigned a radius of around 206 picometers. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline.For comparison, the lighter halides are considerably smaller: bromide (196 pm), chloride (181 pm), and fluoride (133 pm). In part because of its size, iodide forms relatively weak bonds with most elements. Recommanded Product: 3-Iodoaniline.

Qian, Mingcheng;Jiang, Xinyu;Zhang, Mingting;Hu, Lijuan;Liu, Huimin;Zhao, Shuai;Zhou, Xiaoying;Chen, Xin research published 《 Synthesis, Biological Evaluation, and Docking Study of Ring-Opening Amide Analogs of Matrine as Antitumor Agents》, the research content is summarized as follows. In this article, we designed and synthesized two series of matrine analogs with ring-opening in the lactam portion of the mol. Our in vitro cytotoxicity study showed that analog N-(3-bromophenyl)-4-[(1R,3aS,10aR,10bS)-decahydro-1H,4H-pyrido[3,2,1-ij][1,6]naphthyridin-1-yl]butanamide (I) with a meta-bromide on the Ph ring displayed the best antiproliferative activity. Moreover, I induced cell cycle arrest in G1 phase and cell apoptosis in a dose-dependent manner in A549 cells. Mol. modeling revealed that I achieved a higher docking score compared to its precursor tert-Bu (1R,3aS,10aR,10bS)-1-[4-(3-bromoanilino)-4-oxobutyl]octahydro-1H,4H-pyrido[3,2,1-ij][1,6]naphthyridine-2(3H)-carboxylate (II) and parent compound matrine, possibly because I formed a hydrogen bond with SER91 and a halogen bond with GLN320 on the binding site of annexin A2. Overall, we discovered the potential anticancer lead compound I, which can be used for further study both in vitro and in vivo.

626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., Recommanded Product: 3-Iodoaniline

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Organic iodides are organic compounds containing a carbon-iodine (C-I) bond. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline.The carbon-iodine bond is weaker than other carbon-halogen bonds due to the poor electronegative nature of the iodine atom. Synthetic Route of 626-01-7.

Qu, Zhonghua;Chen, Xing;Zhong, Shuai;Deng, Guo-Jun;Huang, Huawen research published 《 NaI/PPh₃-Mediated Photochemical Reduction and Amination of Nitroarenes》, the research content is summarized as follows. A mild transition-metal- and photosensitizer-free photoredox system based on the combination of NaI and PPh₃ was found to enable highly selective reduction of nitroarenes. This protocol tolerated a broad range of reducible functional groups such as halogen (Cl, Br and even I), aldehyde, ketone, carboxyl and cyano. Moreover, the photoredox catalysis with NaI and stoichiometric PPh₃ provides also an alternative entry to Cadogan-type reductive amination when o-nitrobiarenes were used.

Synthetic Route of 626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., 626-01-7.

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In general, organic iodides are light-sensitive and turn yellow during storage, owing to the formation of iodine. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline.Organic iodides can be alkyl, alkenyl, or alkynyl, and all of them are very reactive toward with many kinds of nucleophiles. Safety of 3-Iodoaniline.

Rafiee, F.;Rezaee, M. research published 《 Catalytic reduction of nitroarenes and degradation of dyes at room temperature by an efficient NNN pincer palladium catalyst based on the magnetic amino-triazole-modified chitosan》, the research content is summarized as follows. In this study, a magnetic chitosan biosupport was synthesized and functionalized with a NNN pincer ligand to facilitate palladium immobilization. FT-IR, FE-SEM, EDX, XRD, VSM, ICP, BET, and TGA analyses were used to characterize the synthesized nanocomposite (Fe₃O₄@Triazole-CS@NNN-Pd). Then, its catalytic activity in the reduction of a wide variety of nitroarom. compounds at room temperature was investigated using sodium borohydride as a reducing agent, as well as the degradation of three hazardous dyes, including Methylene Blue (MB), Methyl orange (MO), and Rhodamine B (RhB). This technique is feasible due to its ease of purification, environmental friendliness, and high yield of product generation in a relatively short response time. The nanocatalyst is easily separated, recovered, and reused for numerous cycles without significantly degrading catalytic activity.

626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., Safety of 3-Iodoaniline

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Alkyl iodides react at a faster rate than alkyl fluorides due to the weak C-I bond. Iodo alkanes participate in a variety of organic synthesis reactions, which include the Simmons-Smith reaction (cyclopropanation using iodomethane), 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline. Williamson ether synthesis, Wittig reaction, Grignard reaction, alkyl coupling reactions, and Wurtz reaction. HPLC of Formula: 626-01-7.

Nasresfahani, Zahra;Kassaee, Mohamad Z. research published 《 Bimetallic Ni/Cu mesoporous silica nanoparticles as an efficient and reusable catalyst for the Sonogashira cross-coupling reactions》, the research content is summarized as follows. A bimetallic mesoporous system (Ni/Cu-MCM-41) had been developed and evaluated as an efficient catalyst for the Sonogashira cross-coupling reaction, under palladium-free conditions. In this new methodol., a wide range of aryl halides react with phenylacetylene to gave the corresponding disubstituted alkynes RC≡CAr [Ar = Ph; R = Ph, 4-MeC₆H₄, 4-MeOC₆H₄, etc.] in good yields. Moreover, the present catalytic system was desired because of its high efficiency, easy preparation, low cost, high activity and good recyclability.

HPLC of Formula: 626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., 626-01-7.

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Organic iodides are used in veterinary products (Organic Iodide Powder) as a nutritional source of iodine. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline. In the chemical industry, alkyl iodides serve as excellent alkylating agents and, specifically, methyl iodide is used as a methylating agent in the synthesis of various pharmaceutical drugs. Recommanded Product: 3-Iodoaniline.

Oekchuae, Sittisak;Sirirak, Jitnapa;Charoensuksai, Purin;Wongprayoon, Pawaris;Chuaypen, Natthaya;Boonsombat, Jutatip;Ruchirawat, Somsak;Tangkijvanich, Pisit;Suksamrarn, Apichart;Limpachayaporn, Panupun research published 《 The Design and Synthesis of a New Series of 1,2,3-Triazole-Cored Structures Tethering Aryl Urea and Their Highly Selective Cytotoxicity toward HepG2》, the research content is summarized as follows. Herein, a new series of 1,2,3-triazole-cored structures incorporating aryl urea I [R = H, 2-Me, 4-F, etc.] as anti-HepG2 agents was designed and synthesized via nucleophilic addition and copper-catalyzed azide-alkyne cycloaddition (CuAAC) with excellent yields. Significantly, almost all triazole-cored analogs exhibited less cytotoxicity toward normal cells, human embryonal lung fibroblast cell MRC-5, compared to Sorafenib and Doxorubicin. Among them, I [R = 2-OEt, 2-Cl] exhibited the highest selectivity indexes (SI = 14.7 and 12.2), which were ca. 4.4- and 3.7-fold superior to that of Sorafenib (SI = 3.30) and ca. 3.8- and 3.2-fold superior to that of Doxorubicin (SI = 3.83), resp. Addnl., excellent inhibitory activity against hepatocellular carcinoma HepG2, comparable to Sorafenib, was still maintained. A cell-cycle anal. and apoptosis induction study suggested that I [R = 2-OEt, 2-Cl] likely share a similar mechanism of action to Sorafenib. Furthermore, compounds I [R = 2-OEt, 2-Cl] exhibit appropriate drug-likeness, analyzed by SwissADME. With their excellent anti-HepG2 activity, improved selectivity indexes, and appropriate druggability, the triazole-cored analogs I [R = 2-OEt, 2-Cl] are suggested to be promising candidates for development as targeted cancer agents and drugs used in combination therapy for the treatment of HCC.

Recommanded Product: 3-Iodoaniline, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., 626-01-7.

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Alkyl iodides react at a faster rate than alkyl fluorides due to the weak C-I bond. Iodo alkanes participate in a variety of organic synthesis reactions, which include the Simmons-Smith reaction (cyclopropanation using iodomethane), 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline. Williamson ether synthesis, Wittig reaction, Grignard reaction, alkyl coupling reactions, and Wurtz reaction. Recommanded Product: 3-Iodoaniline.

Okamoto, Kazuhiro;Ishikawa, Aoi;Okawa, Ryotaro;Yamamoto, Kazuki;Sato, Toyotaka;Yokota, Shin-ichi;Chiba, Kazuhiro;Ichikawa, Satoshi research published 《 Design, synthesis and biological evaluation of simplified analogues of MraY inhibitory natural product with rigid scaffold》, the research content is summarized as follows. Muraymycins and caprazamycins are strong inhibitors of MraY, which is responsible for peptidoglycan biosynthesis. Although they are promising antibacterial agents with a novel mode of action, their chem. structures are rather complex. This study investigated the simplification of these natural products by structure-based drug design, synthesis, and biol. evaluation. We developed a simplified rigid scaffold with an arylalkyne moiety, which shows sub-micromolar MraY inhibitory activity. The scaffold is suitable for further investigating the structure-activity relationship by virtue of our synthetic strategy, where the substituent of interest is installed in the last stage of synthesis. This scaffold shows the potential for further use in optimizing MraY inhibitory and antibacterial activities.

626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., Recommanded Product: 3-Iodoaniline

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Organic iodides are used in veterinary products (Organic Iodide Powder) as a nutritional source of iodine. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline. In the chemical industry, alkyl iodides serve as excellent alkylating agents and, specifically, methyl iodide is used as a methylating agent in the synthesis of various pharmaceutical drugs. Safety of 3-Iodoaniline.

Oliva, Monica;Ranjan, Prabhat;Pillitteri, Serena;Coppola, Guglielmo Attilio;Messina, Monica;Van der Eycken, Erik V.;Sharma, Upendra Kumar research published 《 Photoredox-catalyzed multicomponent Petasis reaction in batch and continuous flow with alkyl boronic acids》, the research content is summarized as follows. Multicomponent reactions (MCRs) are ideal platforms for the generation of a wide variety of organic scaffolds in a convergent and atom-economical manner. Many strategies for the generation of highly substituted and diverse structures have been developed and among these, the Petasis reaction represents a viable reaction manifold for the synthesis of substituted amines via coupling of an amine, an aldehyde and a boronic acid (BA). Despite its synthetic utility, the inherent drawbacks associated with the traditional two-electron Petasis reaction have stimulated continuous research towards more facile and tolerant methodologies. In this regard, the authors present the use of free alkyl BAs as effective radical precursors in this MCR through a single-electron transfer mechanism under mild reaction conditions. The authors have further demonstrated its applicability to photo-flow reactors, facilitating the reaction scale-up for the rapid assembly of complex mol. structures.

Safety of 3-Iodoaniline, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., 626-01-7.

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Iodide is one of the largest monatomic anions. It is assigned a radius of around 206 picometers. 626-01-7, formula is C6H6IN, Name is 3-Iodoaniline.For comparison, the lighter halides are considerably smaller: bromide (196 pm), chloride (181 pm), and fluoride (133 pm). In part because of its size, iodide forms relatively weak bonds with most elements. Safety of 3-Iodoaniline.

Ozawa, Yoshihiro;Shirase, Yuto;Otsuji, Kanji;Miyatake, Kenji research published 《 Tuning hydrophobic composition in terpolymer-based anion exchange membranes to balance conductivity and stability》, the research content is summarized as follows. We designed and synthesized novel terpolymer-based anion conductive polymers, where the effect of hydrophobic composition on the membrane properties was investigated in detail. Precursor terpolymers were first prepared from 2,2-bis(4-chlorophenyl)hexafluoropropane (BAF), 1,6-bis(3-chlorophenyl)perfluorohexane (PAF), and 2,7-dichloro-9,9-bis[6′-(N,N-dimethylamino)hexyl]fluorene via Ni(0)-promoted polycondensation reaction. The following quaternization reaction with di-Me sulfate was successful to obtain five terpolymers, QBPA with different PAF/(BAF + PAF) compositions and supposed chem. structures. QBPA provided thin and bendable membranes by solution casting. TEM images suggested that the membranes exhibited a phase-separated morphol. similar to those of the corresponding parent copolymer membranes. SAXS profiles indicated that QBPA-4 containing 83 mol% PAF exhibited the most distinct periodic structure based on the hydrophobic component. The hydroxide ion conductivity of the membranes showed a volcano-type dependence on the hydrophobic composition, and the highest conductivity (161 mS cm^-1) was achieved with the QBPA-1 membrane at 80°C. Taking also the other properties into account, QBPA-1 and QBPA-5 containing 17 mol% PAF seemed the best-balanced membranes. An alk. fuel cell using the QBPA-1 membrane achieved a maximum power d. of 273 mW cm^-2, exceeding that using the copolymer BAF-QAF membrane (185 mW cm^-2).

626-01-7, 3-Iodoaniline is a useful research compound. Its molecular formula is C6H6IN and its molecular weight is 219.02 g/mol. The purity is usually 95%.

3-Iodoaniline is a fatty acid that is used in analytical methods to measure the concentration of human serum in blood. It can be used to estimate the population growth rate, with a half-life of about 13 hours. 3-Iodoaniline reacts with hydrogen bond and proton to form a reaction solution, which can be catalyzed by palladium-catalyzed coupling and suzuki coupling reactions. The activation energies for these reactions are typically in the range of 4-8 kcal/mol. The chemical ionization technique is a type of mass spectrometry that is used to determine kinetic data for this compound. Hydrochloric acid can be added as an acid catalyst to increase the rate of reaction and generate more accurate kinetic data., Safety of 3-Iodoaniline

Referemce:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com