Tag: M.W=300-400

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 672-57-1 name is 1-Chloro-2-iodo-4-(trifluoromethyl)benzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 672-57-1

General procedure: The corresponding iodobenzenederivative 14a or 14b (1.80 mmol) and 5-formyl furan-2-ylboronicacid 15 (2.34 mmol) were dissolvedin 10 mL DMF and 15 mL EtOH. The reaction mixture was stirred for 10 min underN2, then Pd(PPh3)2Cl2 (0.18 mmol)and a solution of Na2CO3 (2M, 10.8 mmol) were added to thereaction mixture, and the light-orange suspension was stirred under N2at room temperature. After 1 h the reaction went to completion (TLC) and wasquenched with 1M HCl, then EtOAc (10 mL) was added, and the mixture was stirreduntil the two layers became clear. The combined organic layers were washed withH2O and brine, dried over Na2SO4, filtered,and evaporated under reduced pressure. The crude product was purified by flashchromatography using PE/EtOAc as eluent to yield the desired product as a solid(yields: 8 (64%), 13 (87%)).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Chloro-2-iodo-4-(trifluoromethyl)benzene, and friends who are interested can also refer to it.

Reference:
Article; Botta, Lorenzo; Maccari, Giorgio; Calandro, Pierpaolo; Tiberi, Marika; Brai, Annalaura; Zamperini, Claudio; Canducci, Filippo; Chiariello, Mario; Marti-Centelles, Rosa; Falomir, Eva; Carda, Miguel; Bioorganic and Medicinal Chemistry Letters; vol. 27; 11; (2017); p. 2502 – 2505;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 640280-28-0, name is 1-Bromo-2-iodo-4-(trifluoromethyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1-Bromo-2-iodo-4-(trifluoromethyl)benzene

A vial was charged with N-(2,4-dimethoxybenzyl)-l-methyl-3-(4,4,5,5- tetramethyl-l,3,2-dioxaborolan-2-yl)-N-(l,2,4-thiadiazol-5-yl)-lH-indole-6-sulfonamide (.500 g, 0.876 mmol), 2-bromo-l-iodo-4-(trifluoromethyl)benzene (0.769 g, 2.191 mmol), potassium phosphate (0.651 g, 3.07 mmol), and PdCi2(dppf)-CH2Ci2 (0.072 g, 0.088 mmol). DMF (5.84 ml), and the vial was flushed with argon, sealed, and stirred at 60 C for two hours. The reaction was diluted with ethyl acetate and washed with water. The aqueous layer was extracted with ethyl acetate, and the combined organic layers were washed with brine, dried with sodium sulfate, filtered, and concentrated. The material was purified via column chromatography (silica gel, gradient elution 0 to 100% EtOAc:Hexanes) to afford 3-(2-bromo-4-(trifluoromethyl)phenyl)-N-(2,4- dimethoxybenzyl)-l-methyl-N-(l ,2,4-thiadiazol-5-yl)-lH-indole-6-sulfonamide (.255 g, 0.382 mmol, 43.6 % yield) as an off-white solid, m/z (ESI) 667.0 (M+H)+.

The synthetic route of 1-Bromo-2-iodo-4-(trifluoromethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DINEEN, Thomas; MARX, Isaac, E.; NGUYEN, Hanh, Nho; WEISS, Matthew; AMGEN INC.; WO2013/25883; (2013); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 175278-30-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 175278-30-5, name is 4-Bromo-2-ethyl-1-iodobenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example R: Preparation of 4-bromo-2-ethylbenzaldehydeTo a solution of 4-bromo-2-ethyl-1-iodobenzene (75 g, 0.24 mol) in tetrahydrofuran (375 ml) at – 75 0C is added n-butyl lithium (1.6 M in hexanes, 196 ml, 0.31 mol) dropwise, maintaining the temperature of the reaction mixture below -70 °C. When the addition is complete the mixture is stirred at -75 0C for an additional 30 minutes and then lambda/,lambda/-dimethylformamide (70.7 g, 0.97 mol) is added dropwise. After the addition is complete the reaction is stirred at -75 °C for 2 hours, then allowed to warm to room temperature for 2 hours. The mixture is cooled in an ice bath and acidified with 0.5 N aqueous hydrochloric acid. The mixture is extracted with ethyl acetate (3 x 500 ml) and the organic fractions are combined, washed with brine, and dried over anhydrous sodium sulphate. The mixture is filtered and the filtrate is evaporated under reduced pressure. The residue is purified by column chromatography on silica gel to give 4-bromo-2- ethylbenzaldehyde (48 g) as an oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-2-ethyl-1-iodobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SYNGENTA LIMITED; SYNGENTA PARTICIPATIONS AG; WO2009/74314; (2009); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 811842-30-5, name is 2-Bromo-1-fluoro-4-iodobenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 811842-30-5

General procedure: To a 20 mL vial with a stir bar was added aryl halide 1 (2.00 mmol), Pd(dba)2 (28.8 mg, 2.5 mol %), Xantphos (28.9 mg, 2.5 mol %). The vial was sealed with a Teflon-lined cap and THF (6.0 mL) was added. The mixture was vacuumed and backfilled with nitrogen (3×). A solution of ethyl 2-bromozincacetate (2a) in THF (0.40 M, 6.0 mL, 1.2 equiv) filtered through a Target Nylon 0.45 mum filter (1.25-inch OD) was syringed in and the reaction mixture was then heated to 65 C and monitored by HPLC. Upon reaction completion based on HPLC analysis (?95% conversion unless the reaction was stalled), the mixture was cooled to room temperature and quenched with 1 M aq HCl (5.0 mL), followed by addition of brine (5.0 mL). The organic layer was separated and concentrated in vacuum. The residue was purified by silica gel column chromatography using gradient EtOAc in hexanes.

The synthetic route of 811842-30-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wong, Brian; Linghu, Xin; Crawford, James J.; Drobnick, Joy; Lee, Wendy; Zhang, Haiming; Tetrahedron; vol. 70; 7; (2014); p. 1508 – 1515;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 31827-94-8, name is 2-Bromo-1-(4-iodophenyl)ethanone, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 31827-94-8, Safety of 2-Bromo-1-(4-iodophenyl)ethanone

General procedure: The appropriate carbonyl compound (50 mmol) was dissolved in 50 mL of ethanol and magnetically stirred with an equimolar quantity of thiosemicarbazide for 24 h at room temperature with catalytic amounts of acetic acid. The desired thiosemicarbazone precipitated from reaction mixture, was filtered, crystallized from suitable solvent, and dried. Equimolar quantities of 4-iodo-acetophenone and bromine, both dissolved in chloroform, were stirred for 4 h at room temperature until the presence of HBr disappeared. The solution was evaporated under vacuum and the obtained pale yellow solid was washed with petroleum ether to give alpha-bromo-4-iodo-acetophenone in good yield (94%). Equimolar amounts of the prepared thiosemicarbazone (50 mmol) and alpha-bromo-4-iodo-acetophenone (50 mmol), both suspended in 50 mL of ethanol, were reacted at room temperature under magnetic stirring for 10 h. The precipitate was filtered and purified by chromatography to give compounds 1-25 in high yield.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Secci, Daniela; Bizzarri, Bruna; Bolasco, Adriana; Carradori, Simone; D’Ascenzio, Melissa; Rivanera, Daniela; Mari, Emanuela; Polletta, Lucia; Zicari, Alessandra; European Journal of Medicinal Chemistry; vol. 53; (2012); p. 246 – 253;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 63131-30-6, name is Ethyl 3-(4-iodophenyl)-3-oxopropanoate, This compound has unique chemical properties. The synthetic route is as follows., Safety of Ethyl 3-(4-iodophenyl)-3-oxopropanoate

The reaction flask was charged sequentially with Cu (OAc) 2.H2O (0.15 mmol, 30 mg), Mg (OTf) 2 (0.2 mmol, 64 mg)DABCO (5 mmol, 560 mg), compound 1h(2 mmol, 634 mg), compound 2a (3 mmol, 342 mg), tBuONO (3 mmol, 309 mg), cyclohexane (10.0 mL).The system is then heated in the air at 80 C for about 12 hours,Extracted with ethyl acetate (40 mL x 3)The product was obtained by simple column chromatography for 3 h with a yield of 81%.The main test data obtained by the product are as follows, by analysis,The actual synthesis product is consistent with the theoretical analysis.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 63131-30-6.

Reference:
Patent; Soochow University (Suzhou); Wan Xiaobing; Chen Rongxiang; Chen Jijun; Fang Shangwen; Long Wenhao; (22 pag.)CN107445912; (2017); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 25252-00-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 25252-00-0 as follows.

2-bromo-5-iodo-benzoic acid (5.0 g, 15.3 mmol) and oxalyl chloride (4.0 mL, 46.5 mmol) were dissolved in dichloromethane (30 mL), then the reaction mixture was cooled to 0 C., and then 2 drops of N, N-dimethylformamide were slowly added. The reaction mixture was naturally warmed up to room temperature and then stirred for 1 hour until the reaction system became clear. The solvent and excess oxalyl chloride were removed under reduced pressure. The resulting residue was dried in vacuo to give 2-bromo-5-iodobenzoyl chloride (5.25 g, a pale yellow oil, yield: nearly 100%).

According to the analysis of related databases, 25252-00-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Jiangsu Hansoh Pharmaceutical Co., Ltd.; ZHONG, Huijuan; LIAO, Jianchun; YU, Hongping; XU, Yaochang; LI, Qing; CHEN, Jianghua; GAO, Peng; TAN, Songliang; WANG, Shaobao; (45 pag.)US2016/222047; (2016); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 689291-89-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 689291-89-2 name is 5-Bromo-2-iodobenzaldehyde, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 15D N-[(1E)-(5-Bromo-2-iodophenyl)methylene]-N-(tert-butyl)amine The product from Example 15C (2.28 g, 7.3 mmol) in THF (10 mL) was treated with t-butylamine (1.61 g, 22.0 mmol) and stirred under nitrogen at room temperature for 40 hours. The mixture was concentrated under reduced pressure and the residue was dissolved in 30 mL of methylene chloride. The methylene chloride was washed with 10 mL water and concentrated to provide the title compound which was used in the next step without further purification. 1H NMR (CDCl3, 400 MHz) delta 8.29 (s, 1H), 8.05 (d, J=4 Hz, 1H), 7.66 (d, J=8 Hz, 1H), 7.19 (dd, J=4, 8 Hz, 1H), 1.34 (s, 9H). MS (DCl/NH3) 366 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromo-2-iodobenzaldehyde, and friends who are interested can also refer to it.

Reference:
Patent; Altenbach, Robert J.; Black, Lawrence A.; Chang, Sou-Jen; Cowart, Marlon D.; Faghih, Ramin; Gfesser, Gregory A.; Ku, Yi-Yin; Liu, Huaqing; Lukin, Kirill A.; Nersesian, Diana L.; Pu, Yu-ming; Curtis, Michael P.; US2005/272736; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 4897-68-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4897-68-1, name is 1-Bromo-2-iodo-4-methoxybenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In an oven dried Schlenk tube under nitrogen atmosphere, were added allylic alcohol 6 (500.0mg, 1.76-3.38mmol), aryl halide 1 (2.11-4.06mmol), Pd(OAc)2 (11.8-22.7mg, 3mol%), triethylamine (356.2-684.1mg, 3.52-6.76mmol), followed by dry acetonitrile (4mL), at room temperature. The resulted reaction mixture was stirred for 24h at 80C. Progress of the reaction was monitored by TLC. The reaction mixture was quenched with the aqueous NH4Cl solution and extracted with ethyl acetate (3×20mL). The organic layer was dried over anhydrous Na2SO4 and concentrated under reduced pressure. Purification of the residue on a silica gel column chromatography using petroleum ether/ethyl acetate as eluent furnished the ketone 7 (46-58%).

The synthetic route of 1-Bromo-2-iodo-4-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ramulu, B. Venkat; Mahendar; Krishna; Reddy, A. Gopi Krishna; Suchand; Satyanarayana; Tetrahedron; vol. 69; 38; (2013); p. 8305 – 8315;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17024-12-3, name is 9-Iodophenanthrene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 17024-12-3

Mixed under argon flow were 73 g of 4-bromodiphenylamine (A4), 135 g of 9-iodophenanthrene, 34 g of sodium t-butoxide (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 4 g of bis(triphenylphosphine)palladium dichloride (manufactured by Tokyo Kasei Kogyo Co., Ltd.) and 1.5 liter of xylene, and they were reacted at 130C for 12 hours. Water was added to the reaction liquid, and the mixture was filtered through celite, followed by carrying out separation thereof with toluene. The oil layer was concentrated under reduced pressure to obtain crystal. This was refined through a column and then dissolved in toluene, and hexane was added thereto to reprecipitate crystal. It was filtered and then dried to obtain 82 g of N-(4-bromophenyl)-N-phenyl-9-aminophenanthrene (B3).

The synthetic route of 17024-12-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; EP1559706; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com