Month: March 2021

Synthetic Route of 4949-69-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4949-69-3, name is 4-Iodo-3-methylaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 2-iodo-5-aminotoluene (10 g, 43.1 mmol) in THF (200 ml) was added sodium bicarbonate (10.81 g, 128.76 mmol) and Boc2O (14.09 g, 64.66 mmol) and the reaction mixture was stirred at 50 C for 12 h. The reaction mixture was then cooled to room temperature, filtered and concentrated under reduced pressure. The residue was partitioned between brine and AcOEt and the aqueous layer was extracted with AcOEt. The combined organic layers were dried over Na2SO4, filtered and concentrated under reduced pressure to give 10 g (yield 69%) of brown solid corresponding to tert-butyl 4-iodo-3-methylphenylcarbamate. The crude product was used in the next step without further purification. Mass: (ES+) C12H16INO2 required 333.02; found 332 [M-H], HPLC/MS method 4.

The synthetic route of 4-Iodo-3-methylaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GENOSCIENCE PHARMA; BRUN, Sonia; BERET, Antoine; BASSISSI, Firas; HALFON, Philippe; COURCAMBECK, Jerome; (275 pag.)WO2017/191599; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 51560-21-5, name is 1,4-Diiodo-2,5-dimethoxybenzene, A new synthetic method of this compound is introduced below., Product Details of 51560-21-5

The compound was synthesized following the method described in Zhao and Schanze, Chem. Commun 2010, 46, 6075-6077, but using compound 6 as the amine. NMR (CD Cl 3, 300 MHz, 6ppm): 7.14 (s, 2H), 6.55 (br, s, 2H), 4.66 (br, s, 6H), 4.34 (s, 4H), 3.03 (m, 12H), 1.76 (m, 12H), 1.45 (m; 12H), 1.43 (s, 54H). 13C NMR (CDCh, 75 MHz, 5ppm): 166.0, 156.2, 151.7 122.7, 86.5, 79.4, 68.7, 58.9, 40.9, 32.9, 28.7, 24.2. HRMS: (ESI+) m/z calcd for CeoHiiuHNsOie [(M + H)]+ 1447.5732, found 1447.5706.

The synthetic route of 51560-21-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; HUANG, Yun; LI, Zhiliang; SCHANZE, Kirk; RISINGER, April; (42 pag.)WO2019/169169; (2019); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 5326-39-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5326-39-6, name is 1-Iodo-4-methyl-2-nitrobenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A mixture of i-1 (1-Iodo-4-methyl-2-nitro-benzene, 0. 0038 mol), methyl-vinylketone (0.0076 mol), Et3N (0.0076 mol) and Pd (OAc) 2 (0.00019 mol) in CH3CN (6 ml) were stirred in a microwave oven (100C, 100 W) for 5 min. The reaction was then filtered through a pad of celite and the filtrate was concentrated. The residue was purified by column chromatography over silica gel (eluent: CH2Cla/Cyclohexane 70/30). Yield: 0.65 g of i-2 (4- (4-Methyl-2-nitro-phenyl)-but-3-en-2-one, 78%, melting point: 58C).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Iodo-4-methyl-2-nitrobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TIBOTEC PHARMACEUTICALS LTD.; WO2005/58871; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 25309-64-2, These common heterocyclic compound, 25309-64-2, name is 1-Ethyl-4-iodobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred solution of aryl halides (2.0 mmol) and thiourea (1.2 equiv) in dry DMSO (2.0 mL) at rt was added nano CuO (5.0 mol %) followed by Cs2CO3 (2.0 equiv) and heated at 110 C for 15 h. The progress of the reaction was monitored by TLC. After the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (20 mL) was added. The combined organic extracts were dried with anhydrous Na2SO4. The solvent and volatiles were completely removed under vacuum to give the crude product, which was purified by column chromatography on silica gel (petroleum ether/ethyl acetate, 9:1) to afford the corresponding coupling product in excellent yields.Recycling of the catalyst:after the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (2.0 mL) was added and CuO was removed by centrifugation. After each cycle, the catalyst was recovered by simple centrifugation, washing with deionized water and ethyl acetate and then drying in vacuo. The recovered nano CuO was used directly in the next cycle.Data of representative examples:Dip-tolylsulfane (Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Bis(4-ethylphenyl)sulfane (Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Bis(3-nitrophenyl)sulfane (Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.4,4′-Thiodianiline (Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Dithiophen-3-ylsulfane (Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Dipyrimidin-5-ylsulfane (Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; found: C, 50.45; H, 3.13; N, 29.41; S, 16.81.Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; f…

Statistics shows that 1-Ethyl-4-iodobenzene is playing an increasingly important role. we look forward to future research findings about 25309-64-2.

Reference:
Article; Reddy, K. Harsha Vardhan; Reddy, V. Prakash; Shankar; Madhav; Anil Kumar; Nageswar; Tetrahedron Letters; vol. 52; 21; (2011); p. 2679 – 2682;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 391211-97-5, name is 3,4-Difluoro-2-((2-fluoro-4-iodophenyl)amino)benzoic acid, A new synthetic method of this compound is introduced below., Safety of 3,4-Difluoro-2-((2-fluoro-4-iodophenyl)amino)benzoic acid

To a stirred mixture of 3,4-difluoro-2-[(2-fluoro-4-iodophenyl)amino] benzoic acid (12 g, 30.5 mmol), prepared using procedures similar to those described in US 7,019,033, in dichloromethane (70 mL) at 0 C was added pyridine (2.5 mL, 30.8 mmol) followed by dropwise addition of cyanuric fluoride (2.8 mL, 33.6 mmol). The reaction mixture was stirred at 0 C for 10 minutes and then warmed to room temperature and stirred for 2 hours. The reaction mixture was diluted with water and extracted with dichloromethane (100 mL). The aqueous layer was extracted once with dichloromethane (50 mL). The combined organic layers were washed with saturated aqueous sodium bicarbonate solution, brine, dried over anhydrous sodium sulfate and concentrated in vacuo to give crude product as a brownish solid. Crude product was purified by flash chromatography (plug, 25% ethyl acetate in hexanes) to afford 3,4-difluoro-2-[(2-fluoro-4-iodophenyl)amino] benzoyl fluoride as a beige solid (11.8 g, 97% yield). 1H NMR (400MHz, CD3OD): 8.41 (s, IH), 7.80-7.81 (m, IH), 7.52 (dd, IH), 7.43-7.47 (m, IH), 6.96-7.03 (m, IH), 6.85-6.92 (m, IH).

The synthetic route of 391211-97-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EXELIXIS, INC.; WO2008/76415; (2008); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 34270-90-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 34270-90-1, name is 1-Iodo-2-(2-iodoethoxy)ethane, This compound has unique chemical properties. The synthetic route is as follows.

Step 2: To a 1 L flask filled with 2-chloroethylether (7 mL, 60 mmol) and acetone (280 mL) was added sodium iodide (45 g, 300 mmol). The reaction was heated at reflux under nitrogen for 7 d. The reaction was filtered and the filtrate was concentrated to yield crude 1-iodo-2-(2-iodoethoxy)ethane.To a mixture of 1-iodo-2-(2-iodoethoxy)ethane (848 mg, 2.6 mmol), LHMDS (5 mL, 1.0 M), and THF (5 mL) was added a solution of methyl 1-benzyl-4-(cyanomethyl)-1H-pyrrole-2-carboxylate (500 mg, 2.0 mmol) in THF (2.5 mL). The reaction was complete after stirring at room temperature for 15 min. An aqueous solution of saturated ammonium chloride was added followed by ethyl acetate and water. The mixture was extracted with ethyl acetate (1¡Á) and the combined organic extracts were washed with brine (1¡Á), dried over magnesium sulfate, and concentrated. The crude product was purified by chromatography on silica gel (0-50% ethyl acetate/hexane) to yield the pure methyl 1-benzyl-4-(4-cyanotetrahydro-2H-pyran-4-yl)-1H-pyrrole-2-carboxylate. MS: (M+H)+=324.8.

The chemical industry reduces the impact on the environment during synthesis 1-Iodo-2-(2-iodoethoxy)ethane. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Wyeth; US2009/137554; (2009); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 628-21-7, name is 1,4-Diiodobutane, molecular formula is C4H8I2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 1,4-Diiodobutane

To a solution of 5-bromo-7-chloro-2-[(4-methoxyphenyl)methyl]isoindolin-1-one (1, 0.4 g, 1.09 mmol) in tetrahydrofuran (25 mL) at room temperature was added sodium hydride (131 mg, 5.45 mmol). The reaction was stirred for 30 min and then 1,4-diiodobutane (2, 1691 mg, 5.45 mmol) was added to the reaction mixture. The reaction was stirred at room temperature for an additional 5 h. After completion, the reaction mass was quenched with a cold saturated solution of ammonium chloride at 0 C. The residue was dissolved in ethyl acetate (100 mL) and the organic layer was washed with water (2¡Á20 mL) then with brine (10 mL). The organics were separated and dried using magnesium sulfate before concentration to dryness. The crude was then purified by flash column chromatography using 10% ethyl acetate in hexane as the eluant. The desired fractions were concentrated to dryness under vacuum to afford 5?-bromo-7?-chloro-2?-[(4-methoxyphenyl)methyl]spiro[cyclopentane-1,3?-isoindoline]-1?-one as a yellow solid. Yield: 0.21 g, 45%; MS (ESI) m/z 422.2[M+1]+; 1H NMR (400 MHz, CDCl3) delta 7.54 (s, 1H), 7.40 (s, 1H), 7.26 (d, J=8.10 Hz, 2H), 6.83 (d, J=8.10 Hz, 2H), 4.64 (s, 2H), 3.95 (s, 3H), 2.17-1.72 (m, 8H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 628-21-7, its application will become more common.

Reference:
Patent; EFFECTOR THERAPEUTICS, INC.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; (55 pag.)US2017/121339; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 25309-64-2,Some common heterocyclic compound, 25309-64-2, name is 1-Ethyl-4-iodobenzene, molecular formula is C8H9I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 250 mL 3 -neck round bottom flask equipped with a thermometer and a magnetic stirring bar was charged with 4.01 g (61.3 mmol) of zinc dust and 35 mL of dimethylformamide (DMF) under a nitrogen atmosphere. The slurry was treated with 0.56 g (2.2 mmol) of iodine. The red disappeared in 90 seconds. The reaction mixture was treated with 6.00 mL (8.18 g, 42.0 mmol) of ethyl 4-bromobutyrate and heated to 800C for 4 hour. The reaction mixture was cooled to 300C and treated with 4.98 g (21.5 mmol) of 4-iodoethylbenzene and 0.48 g (0.9 mmol) of dichlorobis(triphenylphosphine)nickel(II). The reaction mixture was heated to 45C for 80 hours. The cooled reaction mixture was treated with aqueous 4% hydrochloric acid to quench the excess zinc. The mixture was extracted with methyl t-butyl ether (MTBE) (1 X 60 mL). The organic phase was washed with brine (1 X 30 mL), dried over sodium sulfate and concentrated. The crude ethyl 4-(4-ethylphenyl)butyrate was taken up in ethanol, treated with 20 mL of 2N aqueous sodium hydroxide, and heated to reflux. After 4 hours the reaction mixture was cooled to 25C and washed with MTBE (2 X 30 mL). The aqueous phase was acidified with aqueous 4% hydrochloric acid. A solid was isolated by filtration to give 1.99 g of 4-(4-ethylphenyl)butanoic acid. IH NMR (d6- DMSO): delta 11.9, bs, IH (COOH); delta 6.98, d, 2H, (arylH’s); delta 6.95, d, 2H (arylH’s); delta 2.41, m, 4H, (CH2’s alpha to aryl); delta 2.07, t, 2H (CH2 alpha to COOH); delta 1.64, m, 2H (CH2 beta to both aryl and COOH); delta 1.03, t, 3H (CH3). 13C NMR (d6-DMSO): 174.23, 141.08, 138.67, 128.20, 127.65, 33.97, 33.03, 27.73, 26.35, 15.65.

The synthetic route of 25309-64-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EMISPHERE TECHNOLOGIES, INC.; WO2008/112368; (2008); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 191348-14-8, name is 2-Iodo-4-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2-Iodo-4-methoxyaniline

Under anhydrous and anaerobic conditions, 0.1 mmol of 2-iodo-4-methoxyaniline, 0.12 mmol of 3-fluoro-4-methoxybenzaldehyde, 0.3 mmol of selenium powder, 0.005 mmol of copper, 0.2 mmol of potassium hydroxide and 10 ml were added. DMSO solution in a single-mouth round bottom flaskIn the reflux reaction at 120 C, the reaction was monitored by TLC, and the pure methoxy-containing benzoselenazole compound was obtained by column chromatography.The product was demethylated with boron tribromide (6 eq.) to give the product as a white solid.The yield was 28%.

The synthetic route of 2-Iodo-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wuhan University; Zhou Haibing; Zhang Silong; Hu Zhiye; Li Yuanyuan; Ning Wentao; Dong Chune; (13 pag.)CN108863985; (2018); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 90347-66-3 as follows. COA of Formula: C9H9IO2

To the oil of Step 1 in THF, copper iodide (1.1 g, 5.74 mmol, 0.1 eq) and tetrakis (triphenylphosphine) palladium (3.3 g, 2.86 mmol, 0.05 eq) was added. The solution was purged with nitrogen 3 times. To the solution triethylamine (11.57 g, 114.28 mmol, 2.0 eq) and trimethylsilylacetylene (8.4 g, 85.71 mmol, 1.5 eq) was added. Then the solution obtained was stirred at room temperature for 24 hours, evaporated to dryness under reduced pressure and the title product was isolated by column chromatography as a yellow oil.

According to the analysis of related databases, 90347-66-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Si Chuan University; Yang, Shengyong; Wei, Yuquan; (168 pag.)US2017/305920; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com