Category: iodides-buliding-blocks

Synthetic Route of 52548-14-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 52548-14-8 as follows.

In the reactor,Add 90% acetone (volume fraction) 400mL,Stirring,26.2 g of compound (01)Then 34.5 g of potassium carbonate powder was added,0.38 g copper iodide (CuI),1,2,3-triazole.External temperature was raised to 70 ,During the heating process, a large amount of gas is generated,The reaction was stirred at reflux for 5 hours.The reaction mixture was then distilled under reduced pressure at 40 C,When the reaction system is more viscous, add 45mL of water and continue to reduce the steam to distillate without acetone (no acetone in the gas phase). Distilled residue was added 300mL of water, 25% sulfuric acid was added dropwise at room temperature to adjust the pH to 1-2, a yellow suspension.Stir for 30 minutes, filter, and the solids are washed three times with water, 60 mL each. The resulting solid was dried to dryness at 70 C in vacuo,Have pale green solid 19.48g,Compound (1), purity 95.06%.

According to the analysis of related databases, 52548-14-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; (6 pag.)CN104557744; (2017); B;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, molecular formula is C9H9IO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 103440-52-4

General procedure: This kind of general experimental procedure is based on our already published procedure.13 The general procedure (GP) was carried out with ortho-iodoester 1a-d (105.0-136.0 mg, 0.40 mmol) and aldehyde 2a-k (195.0-313.0 mg, 1.6 mmol) in the presence of Pd(OAc)2 (5.0 mg, 5 mol%), Ag2O (111.3 mg, 0.48 mmol), and TBHP (257.1 mg, 2.0 mmol) allowing the reaction mixture to stir at 120 C for 12-20 h. Progress of the reaction was monitored by TLC until the ortho-iodoester 1a-d had completely reacted. Then the reaction mixture was removed from the oil bath and allowed to reach r.t. DCE (2 mL) and concd H2SO4 (1.0 mL) were added and the mixture was stirred at 60 C for 5 min to 2 h. Progress of the product formation was monitored by TLC until the reaction was complete. The mixture was quenched by the addition of aq NaHCO3 and then extracted with CH2Cl2 (3 * 15 mL). The combined organic layers were washed with brine, dried (Na2SO4), and filtered. Evaporation of the solvent under reduced pressure and purification of the crude material by silica gel column chromatography (PE/EtOAc) furnished the products 3 (57.0-86.0 mg, 55-69%). The products 3aa, 3ac, 3ai, 3aj, 3ak, 3ba, 3bc, 3be, and 3bj are reported in the literature.9

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 103440-52-4, its application will become more common.

Reference:
Article; Suchand, Basuli; Satyanarayana, Gedu; Synthesis; vol. 51; 3; (2019); p. 769 – 779;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 103962-05-6, name is 1-Iodo-4-(trifluoromethoxy)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C7H4F3IO

Preparation of intermediate N A solution of tert-butyl 2,6-diazaspiro[3.3]heptane-2-carboxylate (CAS [1041026-70- 3], 500 mg, 2.52 mmol), l-iodo-4-(trifiuoromethoxy)benzene (CAS [103962-05-6], 726 mg, 2.52 mmol), X-phos (240 mg, 0.504 mmol), Pd(dba)2 (145 mg, 0.252 mmol) and t-BuONa (969 mg, 10.1 mmol) in dioxane (8 mL) was irradiated under microwave at 110°C for 1 hour under N2. Water was added to the mixture and the mixture was extracted with ethyl acetate (50 mL x 2). The organic layers were washed brine, dried over MgS04 and filtered. The filtrate was concentrated. The crude product was purified by column chromatography over silica gel (eluent: ethyl acetate/hexane from 0 to 1/5). The desired fractions were collected and concentrated to give N, 500 mg, 50percent.

The synthetic route of 1-Iodo-4-(trifluoromethoxy)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN SCIENCES IRELAND UC; GUILLEMONT, Jerome, Emile, Georges; MOTTE, Magali, Madeleine, Simone; RABOISSON, Pierre, Jean-Marie, Bernard; TAHRI, Abdellah; (194 pag.)WO2017/1660; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20691-72-9, name is 4-Iodo-2-nitroaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4-Iodo-2-nitroaniline

Step b. To a stirred solution of SnCl2 (78.0 g, 346 mmol) in concentrated HCl (150 mL) was added 2 (25.4 g, 92.0 mmol) in three portions over 30 min at rt. The reaction mixture was heated at 70 C for 1 h and then stirred at 0 C overnight. The mixture was treated with H2O (150 mL) and stirred for 2 h. The precipitate was collected by filtration and dried under vacuum to afford 3 (17 g, 81% yield) as a grey solid. LC-MS (ESI) m/z 235.0 (M + H)+.

The synthetic route of 20691-72-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PRESIDIO PHARMACEUTICALS, INC.; LI, Leping; ZHONG, Min; WO2010/65668; (2010); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19094-56-5, name is 2-Chloro-5-iodobenzoic acid, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2-Chloro-5-iodobenzoic acid

A solution of 2-chloro-5-iodobenzoic acid (28 g, 99 mmoles) and toluene (198 ml.) was cooled to O0C. A 1 M diisobutyl aluminium hydride (DIBAL) solution in toluene 208 ml_, 208 mmol) solution was added drop wise over 20 minutes. The solution was allowed to slowly warm to rt. After 16 h the solution was cooled to O0C, MeOH and 1 M HCI was slowly added (exothermic reaction). The solution became clumpy and was filtered and the clumps washed with EtOAc. The organic phase was then isolated and the aqueous layer washed with EtOAc. The combined organic extracts were then washed with brine, dried (Na2SO4), and concentrated. The product was purified by Biotage chromatography (0% – 100% EtOAc/Hexanes) to afford 9.01 g of product as a solid (34%). 1H NMR (400 MHz, chloroform- cQ delta ppm 7.85 (d, J=2.02 Hz, 1 H) 7.55 (dd, J=8.34, 2.27 Hz, 1 H) 7.09 (d, J=8.34 Hz, 1 H) 4.74 (s, 2 H) 2.25 (s, 1 H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 19094-56-5.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/77009; (2008); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 69113-59-3, name is 3-Iodobenzonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 69113-59-3, name: 3-Iodobenzonitrile

General procedure: A mixture of CuI (Sigma-Aldrich, 0.025 mmol, 5 mol%), anhydrousK3PO4 (0.65 mmol), 2-mercaptobenzimidazole (0.5mmol), DMSO (0.2 mL), and aryl halide (0.75 mmol) were addedto a reaction vial and a screw cap was fitted to it. The reactionmixture was stirred under air in a closed system at 100 C for24 h. The heterogeneous mixture was subsequently cooled toroom temperature and diluted with dichloromethane. The combinedorganic extracts were dried with anhydrous Na2SO4, andthe solvent was removed under reduced pressure. The crudeproduct was loaded into the column using minimal amounts ofdichloromethane and was purified by silica gel column chromatographyto afford the S-arylated product. The identity andpurity of products was confirmed by 1H NMR and 13C NMRspectroscopic analysis

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Iodobenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Tan, Bryan Yong-Hao; Teo, Yong-Chua; Synlett; vol. 29; 15; (2018); p. 2056 – 2060;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 886762-71-6,Some common heterocyclic compound, 886762-71-6, name is 1-Fluoro-3-iodo-2-nitrobenzene, molecular formula is C6H3FINO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

NaHCOs [5.70 g, 67.8 mmol] was added to a stirred solution of compound 3 [5.00 g, 22.6 mmol] in water (30 mL) at room temperature under argon atmosphere and stirred for 10 minutes. Finally, solution of compound 2 [4.22 g, 15.8 mmol] in EtOH (40 mL) was added to the reaction mixture and stirred at 80 C for 4 h. After completion, solvent was evaporated, crude was diluted with water [200 mL] and extracted with Et?.0 [200 mLj. Organic part was separated; pH of the aqueous part was slowly adjusted to 2-3 using 1 (N) aqueous HC1 under ice cooled condition and immediately extracted with EtOAc [2×100 mi]. Organic part was separated, dried [Na2SQ4] and concentrated under reduced pressure to afford compound 4 [4.5 g, 43%]. Mass [ESI]: m/z 468.27 [M++l ]

The synthetic route of 886762-71-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CYTOSITE BIOPHARMA INC.; BILCER, Geoffrey, Malcolm; KELLY, Terence, Alfred; (190 pag.)WO2019/160916; (2019); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 21740-00-1, name is 5-Bromo-2-iodobenzoic acid, A new synthetic method of this compound is introduced below., Product Details of 21740-00-1

General procedure: To a stirred solution of 2-iodobenzoic acids a (10 mmol) in CH2Cl2, was added DCC (dicyclohexylcarbodiimide, 11 mmol), DMAP (Dimethylaminopyridine, 2 mmol) and alcohols b (10 mmol) in sequence. The resulting solution was stirred overnight at room temperature then filtered through a sand core funnel and washed with diethyl ether (2 x 40mL). The combined organic layers were washed with water, brine, dried over Na2SO4, and concentrated under reduced pressure. The crude material was purified by flash column chromatography to obtain the pure product c in moderate to good yields. To a soluton of 2-iodobenzoates c in Et3N (5 mL) was added PdCl2 (PPh3)2 (4 mol %) and CuI (2 mol %) and the reaction vial was flushed with Ar and the reaction mixture was stirred for 5 minutes. A solution of propargyl alcohols d (1.05 equiv) in Et3N (5 mL) were then added dropwise through a syringe for 5 minutes. The resulting solution was stirred at room temperature overnight. When the reaction was considered complete as determined by TLC analysis, the mixture was quenched by addition of saturated aqueous ammonium chloride (10 mL) and extracted with ethyl ether (3 x 40 mL). The combined organic layers were washed with water, brine, dried over Na2SO4, and concentrated under reduced pressure. The crude material was purified by flash column chromatography to give 1.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhu, Hai-Tao; Tong, Xiao-Juan; Zhou, Ni-Ni; Yang, De-Suo; Fan, Ming-Jin; Tetrahedron Letters; vol. 57; 49; (2016); p. 5497 – 5500;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 52548-63-7,Some common heterocyclic compound, 52548-63-7, name is 5-Fluoro-2-iodobenzoic acid, molecular formula is C7H4FIO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 2-80 4-Chloro-6-fluoro-3-methyl-1-(2-pyridinyl)-1H-pyrazolo[3,4-b]quinoline Following the procedures described in Reference Example 2-5 and Example 2-1, the title compound was prepared from 5-fluoro-2-iodobenzoic acid and 3-methyl-1-(2-pyridinyl)-1H-pyrazol-5-ylamine (57% yield). mp: 185-187 C. (recrystallized from ethyl acetate). NMR (DMSO-d6) delta: 3.00 (3H, s), 7.21-7.28 (1H, m), 7.62 (1H, ddd, J=3.0 Hz, 5.4 Hz, 9.4 Hz), 7.89-7.99 (2H, m), 8.19 (1H, dd, J=5.4 Hz, 9.4 Hz), 8.69 (1H, d, J=3.6 Hz), 8.77 (1H, d, J=8.2 Hz).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Fluoro-2-iodobenzoic acid, its application will become more common.

Reference:
Patent; Uchikawa, Osamu; Mitsui, Keita; Asakawa, Akiko; Morimoto, Shigeru; Yamamoto, Masataka; Kimura, Hiroyuki; Moriya, Takeo; Mizuno, Masahiro; US2003/187014; (2003); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 627-32-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 627-32-7, name is 3-Iodo-1-propanol belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 191 Preparation of 4-[6,6-dimethyl-4-oxo-3-(phenylamino)-4,5,6,7-tetrahydro-1H-indol-2-yl]-1-(3-hydroxyropyl)pyridinium iodideA mixture of Example 1 (57 mg, 172 muetaetaomicronIota), 3-iodopropan-1 -ol (2eq), K2CO3 (4eq) in DMF (1 mL) was stirred at RT for 16 h and then at 100C for 16h. Filtered, concentrated and purified by preparative HPLC (Column: XBridge C18 5muetaiota 100×30 mm; Solvent A: Water + 0.1 % TFA; Solvent B: Acetonitrile; Gradient; 0-8 min, 20-40% B: Flow: 70 mL/min) to give the desired product (25 mg, 30%).1 H-NMR (400 MHz ,DMSO-d6), d [ppm]= 1 .09 (6H), 1 .97 (2H), 2.29-2.39 (3H), 2.82 (2H), 3.39 (2H), 4.38 (2H), 6.71 (2H), 6.78 (1 H), 7.09-7.17 (2H), 7.73 (2H), 8.12 (1 H), 8.66 (2H), 12.38 (1 H).

The synthetic route of 3-Iodo-1-propanol has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; GRAHAM, Keith; KLAR, Ulrich; BRIEM, Hans; HITCHCOCK, Marion; BAeRFACKER, Lars; EIS, Knut; SCHULZE, Volker; SIEMEISTER, Gerhard; BONE, Wilhelm; SCHROeDER, Jens; HOLTON, Simon; LIENAU, Philip; TEMPEL, Rene; SONNENSCHEIN, Helmut; BALINT, Jozsef; GRAUBAUM, Heinz; (577 pag.)WO2015/193339; (2015); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com