Category: iodides-buliding-blocks

Related Products of 1258298-01-9, A common heterocyclic compound, 1258298-01-9, name is 2,6-Dichloro-4-iodobenzoic acid, molecular formula is C7H3Cl2IO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Amino-2,6-dichloro-phenol (50 g) was treated with B0C2O (69g ) in 1 ,4-dioxane (0.8 L) at reflux for 18h before the volatiles were removed in vacuo affording (3,5-dichloro-4-hydroxy-phenyl)-carbamic acid fert-butyl ester (70 g), which was used for next step without further purification. This procedure was repeated to afford more of this material. 86 g of the compound and 2,6-dimethylpyridine (49 g) were dissolved in DCM (0.9 L). Tf20 (104 g) was added drop-wise at -78 C. The mixture was allowed to warm to room temperature whereafter it was stirred for 2h. The crude mixture was partitioned between water and DCM. The organic layer was dried over Na2S04, filtered, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (eluent: petane:EtOAc 30: 1) to afford trifluoro-methanesulfonic acid 4-fert-butoxycarbonylamino-2,6- dichloro-phenyl ester (73 g). This material was mixed with Pd(DPPF)Ci2 (4 g), triethylamine (102 mL) in a mixture of methanol (580 mL) and DMF (384 mL). The mixture was refluxed under an atmosphere of carbon monoxide overnight before it was cooled, concentrated in vacuo. The residue was partitioned between water and EtOAc. The organic layer was washed with brine, dried over Na2S04, filtered, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (eluent: pentane:EtOAc 80: 1) to afford A-tert- butoxycarbonylamino-2,6-dichloro-benzoic acid methyl ester (12 g). 7 g of this material was dissolved in 37% aq HC1 (70 mL), and a solution of sodium nitrite (3.75 g) in water (100 mL) was added drop-wise at 0 C. The mixture was stirred for 30 min at 0 C before it was filtered and the filtrate was added to a pre-cooled solution of potassium iodide (24 g) at 0 C. The mixture was warmed to room temperature and stirred overnight. The mixture was extracted with EtOAc. The organic layer was washed with sat. aq NaHSC>3 before it was dried over Na2S04, filtered, and concentrated in vacuo. The residue was purified by column chromatography on silica gel (eluent: pentane:EtOAc 50: 1) to afford 2,6-dichloro-4-iodo- benzoic acid methyl ester (7.9 g). This material was dissolved in a mixture of pyridine (40 mL) and water (7 mL) and treated with lithium iodide (3.2 g) at 130 C for 30h before the volatiles were removed in vacuo. The residue was partitioned between 2M aq HC1 and EtOAc. The organic layer was concentrated in vacuo to afford 2,6-dichloro-4-iodo-benzoic acid (3 g). 0.5 g of this material was stirred in thionyl chloride (8 mL) at 60 C for 3h before excess thionyl chloride was removed in vacuo. The residue was washed with ether and dried to afford 2,6-dichloro-4-iodo-benzoyl chloride (0.53g) that was used directly in the next step where it was dissolved in a mixture of DMF (20 mL) and DIPEA (0.57 mL). To this solution was added lid (277 mg). The mixture was stirred at room temperature for lh. The volatiles were removed in vacuo, and residue was purified by chromatography on silica gel (eluent: DCMMeOH 100:1 to 30:1) to afford 2,6-dichloro-4-iodo-benzoic acid N’-(2-methyl- pyrido[2,3-b]pyrazin-3-yl)-hydrazide (250 mg). This procedure was repeated to afford more material. 380 mg of the compound was dissolved in 1 ,4-dioxane (5 mL). Phosphoryl chloride (4 mL) was added, and the mixture was stirred at 90 C for 1.5h. The volatiles were removed in vacuo. The residue was partitioned between DCM and water. The organic layer was washed with sat. aq. NaHCOs, dried over NaSO i, filtered, and concentrated in vacuo. The residue was purified by preparative TLC (eluent: pentane:EtOAc 2:1) to afford example Id6 (45.5 mg). LC/MS (method WXE-AB10): RT(PDA) = 2.39 min; PDA/ELS purities 97.1% / 98.3%; mass observed 456.0.

The synthetic route of 1258298-01-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; H. LUNDBECK A/S; J?RGENSEN, Morten; BRUUN, Anne Techau; RASMUSSEN, Lars Kyhn; WO2013/34761; (2013); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 61203-48-3, name is 2-Iodo-4,5-dimethoxybenzoic acid, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 61203-48-3, Computed Properties of C9H9IO4

The intermediate 4-amino-6,7-methylenedioxyquinoline o-iodobenzamide derivatives used in Examples 13. a.- 16. a. were prepared using the following general procedure.[221] A 2.0M solution of oxalyl chloride in CH2CI2 (1.3 equiv.) was added to a solution of 2-iodo-5,6-dimethoxybenzoic acid (1.0 equiv.) in anhydrous CH2CI2 (~ 60 mL per 10 mmol benzoic acid) and the solution stirred at reflux for 3 h. The mixture was allowed to cool and was then concentrated to dryness in vacuo. To the residue was added a solution of appropriate 4-amino-6,7-dimethoxyquinoline (1.0 equiv), triethylamine (2 equiv.) in CH2CI2 (~ 60 mL per 4 mmol aminoquinoline). The reaction mixture was then stirred at reflux under N2. . In the case of those derivatives that have an alkylamine incorporated in their structure, the residue was partitioned between CHCI3 and 10% NaOH. The aqueous layer was repeatedly separated with CHCI3. All of the CHCI3 solutions (initial partition and extracts) were combined and dried (MgS04). The aqueous layer was neutralized with 20% NaOH and extracted with CHCI3, dried (MgS04) and evaporated.Example 13.b. N-(6,7-Methylenedioxyquinolin-4-yl)-N-[(2-(i- butyldimethylsilanyloxy)-ethyl] -2-iodo-4,5-dimethoxybenzamide. Prepared from 4- N-[2-(t-Butyldimethylsilanyloxy)]ethyl]amino-6,7-methylenedioxyquinoline (400 mg, 1.15 mmol) in 51.7% yield with a reaction time of 12 h, from the acid chloride prepared using 5.0 mmol of oxalyl chloride and 1.38 mmol of 2-iodo-5,6- dimethoxybenzoic acid. Compound 8h had: mp 79-80 C; IR (KBr); 1653 1H NMR (CDCI3); delta 0.004 (d, 3H, J = 4.2Hz), 0.82 (s, 9H), 3.26 (s, 3H), 3.67 (s, 3H), 3.84- 4.02 (m, 4H), 6.13 (d, 2H, J = 4Hz), 6.40 (s, 1H), 7.02 (s, 1H), 7.33 (d, 1H, J = 4.2Hz), 7.36 (s, 1H), 7.42 (s, 1H), 8.52 (d, 1H, J = 4Hz); HRMS calcd for C27H33IS1N2O6H 637.1232; observed 637.1212

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GENZYME CORPORATION; TEICHER, Beverly, A.; SCHMID, Steven, M.; WO2012/15901; (2012); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 627-31-6,Some common heterocyclic compound, 627-31-6, name is 1,3-Diiodopropane(stabilized with Copper chip), molecular formula is C3H6I2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3,5-bis(4-iodobutyl) pyridine was prepared following a modifiedprocedure reported in the literature [24,25]. 3,5-dimethyl pyridine(1.5 g, 16.0 mmol) in dry THF (32 mL) was treated with Lithium diisopropylamide(19.3 mmol) under nitrogen atmosphere at -30 C for1 h. 1,3-diiodopropane (7.8 g, 32.2 mmol) was then added quickly intothe reaction mixture to produce 3,5-bis(4-bromobutyl)pyridine. Theproduct was purified by silica gel column chromatography using amixture of hexane/EA as eluent to get a light brown colour oil compound(2). Here the yield is around 82%. The synthesis of compound(3) 3,5-bis(4-bromobutyl)pyridine has been done by the same procedureas of compound (2). The synthetic route is given in Scheme 2. 2.2.1.1. Compound 2. 1H NMR (400 MHz, DMSO-d6): delta(ppm) 8.11 (s,2H), 7.59 (s, 1H), 3.33 (t, 4H), 2.67 (t, 4H), 1.82 (m, 4H), 1.59 (m, 4H),13C NMR (100 MHz, CDCl3): delta(ppm) 147.3, 139.7, 137.1, 32.6, 30.1,28.6, 27.3.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,3-Diiodopropane(stabilized with Copper chip), its application will become more common.

Reference:
Retracted Article; Vekariya, Rohit L.; Dhar, Abhishek; Kumar, Nadavala Siva; Pal, Rumpa; Roy, Subhasis; Organic electronics; vol. 51; (2017); p. 477 – 484;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 14452-30-3, A common heterocyclic compound, 14452-30-3, name is 1-(3-Iodophenyl)ethanone, molecular formula is C8H7IO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 63; 5-[1-(3-Iodophenyl)-ethoxy]-quinazoline-2,4-diamine; [00203] Step 1; To a cold (ice water) solution of 3-iodoacetophenone (2.59 gm; 10.5 mmol) in methanol (10 mL) is added sodium borohydride (395 mg; 10.4 mmol) is stirred for thirty minutes. Water (10 mL) is added to the solution and stirred 15 minutes. Saturated ammonium chloride (40 mL) is added and the solution is extracted with ethyl acetate. The organics are separated and dried over magnesium sulfate. The solvent is removed to give 2.26 grams of 1-(3-iodophenyl)-ethanol.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; DECODE CHEMISTRY, INC.; SINGH, Jasbir; GURNEY, Mark E.; WO2005/123724; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 624-75-9, name is 2-Iodoacetonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 624-75-9, Quality Control of 2-Iodoacetonitrile

Example 112b Methyl 3-(Cyanomethyl)-5,6,7,8-tetrahydroindolizine-2-carboxylate 112b A 500-mL three-neck round-bottomed flask equipped with an addition funnel, thermometer and charged with 112a (6.70 g, 37.4 mmol), Iodoacetonitrile (12.5 g, 74.9 mmol), iron (II) sulfate heptahydrate (5.20 g, 18.7 mmol) and dimethyl sulfoxide (250 mL). Hydrogen peroxide (35%, 18.2 g, 187 mmol) was added dropwise to the mixture in 1 h through a syringe pump at room temperature using a water bath. Iron (II) sulfate heptahydrate (2 to 3 equivalent) was added to the reaction mixture in portions to keep the temperature between 25 C to 35 C, until the color of the reaction mixture is deep red. If TLC shows the reaction not completed, then more hydrogen peroxide (2-3 equivalent) and more iron (II) sulfate heptahydrate (1-2 equivalent) are added in the same manner until the reaction is completed. After that time, the reaction mixture was partitioned between saturated sodium bicarbonate solution (200 mL) and ethyl acetate (400 mL). The organic layer was separated, and the aqueous layer was extracted with ethyl acetate (2 * 100 mL). The combined organic layers were washed with saturated Sodium thiosulfate solution (50 mL), dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography to afford a 78% yield (6.40 g) of 112b as a yellow oil: 1H NMR (500 MHz, CDCl3) delta 6.23 (s, 1H), 4.23 (s, 2H), 3.94 (t, 2H, J = 6.5 Hz), 3.81 (s, 3H), 2.74 (t, 2H, J = 6.5 Hz), 2.00 (m, 2H), 1.83 (m, 2H); (APCI+) m/z 219.3 (M+H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoacetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F.Hoffmann-La Roche AG; CRAWFORD, James John; ORTWINE, Daniel Fred; WEI, BinQing; YOUNG, Wendy B.; EP2773638; (2015); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13421-13-1, name is 4-Chloro-2-iodobenzoic acid, This compound has unique chemical properties. The synthetic route is as follows., name: 4-Chloro-2-iodobenzoic acid

Sodium hydroxide (15.3g, 272mmol) in 180mL water solution of the 4- chloro-2-benzoic Acid iodide (15.4g, 54.5mmol), copper powder (0.346g, 5.5mmol), thiophenol (5.57mL, 54.5 It was placed mmol). After heating the reaction mixture solution to 120 C to proceed the reaction for 8 hours, it was passed through Celite and the filtered to remove the copper. While the mixed solution was filtered and stirred to progress after cooling to room temperature, it was added an excess of aqueous HCl solution (5M, 100mL). The resulting white solid was filtered and dried under reduced pressure after washing with excess water under reduced pressure to give the title compound as a white solid (13.7g, 95%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 13421-13-1.

Reference:
Patent; Dongwoo Fine-Chem.,Ltd.; Jo, Sung Hyun; Kim, Hyun Woo; (11 pag.)KR2015/15102; (2015); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 31599-61-8,Some common heterocyclic compound, 31599-61-8, name is 4-Iodo-1,2-dimethylbenzene, molecular formula is C8H9I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of aryl halide (2.0 mmol), phenyl boronic acid (0.244 g, 2.0 mmol), the palladium complex 5a (0.001 mmol) and potassium carbonate (0.232 g, 4.0 mmol) in THF (15 ml)/DMF (15 mL) was refluxed for 1.5 h, as mentioned in Table 3. After 1.5 h, the solvent was evaporated and the reaction mixture wasextracted with diethyl ether. The ether solution was dried over Na2SO4, filtered and passed through a 1200 silica column (60-120 mesh). After evaporation of the ether, solid pure products were obtained. The yields of the products obtained from all the reactions were determined after isolation and the products were characterizedby their 1H NMR spectra (Table 6).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Iodo-1,2-dimethylbenzene, its application will become more common.

Reference:
Article; Pattanayak, Poulami; Pratihar, Jahar Lal; Patra, Debprasad; Brandao, Paula; Felix, Vitor; Chattopadhyay, Surajit; Polyhedron; vol. 79; (2014); p. 43 – 51;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 51839-15-7, These common heterocyclic compound, 51839-15-7, name is Dimethyl 5-iodoisophthalate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Dimethyl-5-iodoisophthalate (1.35 g, 4.21 mmol, Matrix Scientific, Columbia, SC) and lithium hydroxide monohydrate (884 mg, 20.07 mmol) were taken in a mixture of 3.95 mL methanol and 0.99 mL water and the suspension was stirred vigorously at 20 C for 3.5 h. The mixture was diluted with aqueous saturated sodium bicarbonate to a volume of 75 mL, and unreacted ester was removed by extraction with 75 mL ethyl acetate. The aqueous layer was carefully acidified with 1 M HCl to pH 2 and the resultant acid was extracted twice with 250 mL ethyl acetate. The ethyl acetate fractions were combined, dried over sodium sulfate, and the ethyl acetate was evaporated to give a white powder (965 mg, 78.4%): mp 302-303 C 1H NMR-300 MHz (CD3OD) delta 8.55 (d, 2H), 8.60 (d, 1H). 13C NMR (126 MHz, CD3OD) delta 92.6, 129.5, 132.6, 142.2, 165.7. MS (LCMS-ESI; negative ion mode) m/z: 290.7 (M-H)-; HRMS (FAB-) Calcd for C8H4IO4 (M-H)- 290.9154. Found 290.9141 ¡À 0.0000 (n = 2).

The synthetic route of 51839-15-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Vaidyanathan; White; Affleck; Zhao; Welsh; McDougald; Choi; Zalutsky; Bioorganic and Medicinal Chemistry; vol. 20; 24; (2012); p. 6929 – 6939;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 181765-86-6, These common heterocyclic compound, 181765-86-6, name is Methyl 5-bromo-2-iodobenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 500-mL round-bottom flask reactor, methyl 5-bromo-2-iodobenzoate (25.0 g, 73 mmol), 4-dibenzofuran boronic acid (18.7 g, 88 mmol), tetrakis (triphenylphosphine)palladium (1.7 g, 0.15 mmol), and potassium carbonate (20.2 g, 146.7 mmol) were stirred together with toluene (125 mL), tetrahydrofuran (125 mL), and water (50 mL) for 10 hrs at 80 C. After completion of the reaction, the reaction mixture was cooled to room temperature and extracted with ethyl acetate. The organic layer thus formed was separated, concentrated in a vacuum, and purified by column chromatography to afford (75.0 g, 60.1%).

Statistics shows that Methyl 5-bromo-2-iodobenzoate is playing an increasingly important role. we look forward to future research findings about 181765-86-6.

Reference:
Patent; SFC CO., LTD.; LEE, Chang-Hee; SEO, Hyun-JONG; YOON, Seo-Yeon; SHIM, So Young; KIM, Si-In; (214 pag.)US2018/233669; (2018); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 31827-94-8, name is 2-Bromo-1-(4-iodophenyl)ethanone, This compound has unique chemical properties. The synthetic route is as follows., name: 2-Bromo-1-(4-iodophenyl)ethanone

General procedure: The appropriate carbonyl compound (50 mmol) was dissolved in 50 mL of ethanol and magnetically stirred with an equimolar quantity of thiosemicarbazide for 24 h at room temperature with catalytic amounts of acetic acid. The desired thiosemicarbazone precipitated from reaction mixture, was filtered, crystallized from suitable solvent, and dried. Equimolar quantities of 4-iodo-acetophenone and bromine, both dissolved in chloroform, were stirred for 4 h at room temperature until the presence of HBr disappeared. The solution was evaporated under vacuum and the obtained pale yellow solid was washed with petroleum ether to give alpha-bromo-4-iodo-acetophenone in good yield (94%). Equimolar amounts of the prepared thiosemicarbazone (50 mmol) and alpha-bromo-4-iodo-acetophenone (50 mmol), both suspended in 50 mL of ethanol, were reacted at room temperature under magnetic stirring for 10 h. The precipitate was filtered and purified by chromatography to give compounds 1-25 in high yield.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 31827-94-8.

Reference:
Article; Secci, Daniela; Bizzarri, Bruna; Bolasco, Adriana; Carradori, Simone; D’Ascenzio, Melissa; Rivanera, Daniela; Mari, Emanuela; Polletta, Lucia; Zicari, Alessandra; European Journal of Medicinal Chemistry; vol. 53; (2012); p. 246 – 253;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com