Category: iodides-buliding-blocks

Application of 170112-66-0, The chemical industry reduces the impact on the environment during synthesis 170112-66-0, name is 3,4,5-Trifluoroiodobenzene, I believe this compound will play a more active role in future production and life.

3,4,5-fluoro-iodobenzene (10.0g, 38.0mmol), bromo difluoroethyl acetate (23.1g, 114mmol) and copper (2.90g, 45.6mmol) and stirred for 3 h with dimethyl sulfoxide solution (40ml) 80 of.Ethyl acetate was added to the reaction mixture, the insoluble matter was separated by filtration.Pour the water filtrate was extracted with ethyl acetate.The extract was washed with saturated brine, dried over anhydrous sodium sulfate, and concentrated under reduced pressure.The concentrate was purified by silica gel column chromatography and purified by (elution solvent ethyl acetate / n-hexane = 1/10) to give the title compound as a colorless oil (yield 7.20 g, 75% yield).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,4,5-Trifluoroiodobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Hokko Chemical Industry; Suzuki, Jun; Hiroki, Eisho; Nonaka, Hisato; (15 pag.)JP2016/84346; (2016); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 33184-48-4, These common heterocyclic compound, 33184-48-4, name is 4-Chloro-2-iodo-1-methylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of P(^-Bu)3 (0.0757 M, 5.19 ml_, 0.393 mmol) and a solution of 4-chloro-2-iodo-1-methylbenzene a107 (5.0 g, 19.8 mmol) and tert-butyl acetate (2.53 g, 21.8 mmol) in degassed toluene (50 ml.) are added to a mixture of LiHMDS (7.60 g, 45.5 mmol) and Pd(dba)2 (0.226 g ,0.393 mmol), under argon atmosphere. The reaction mixture is stirred at room temperature for 20 hours (according to the LC-MS data, 2-3 hours are sufficient for the reaction to go to completion) and it is quenched with a saturated ammonium chloride solution (50 mL). After 15 min the organic layer is separated, and the aqueous layer is extracted with diethylether. The combined organic extracts are dried over anhydrous Na2SC>4 and evaporated. The residue is purified by chromatography on silicagel (petroleum ether/AcOEt 10/1 v/v) to afford, after evaporation, tert-butyl (5-chloro-2-methylphenyl)acetate a108 (3.70 g) as a yellow oil (90 % purity). Yield: 77 %.1 H NMR deltaH (CDCI3, 400 MHz, ppm): 1.44 (s, 9H); 2.26 (s, 3H); 3.50 (s, 2H), 7.06-7.19 (m,3H).

Statistics shows that 4-Chloro-2-iodo-1-methylbenzene is playing an increasingly important role. we look forward to future research findings about 33184-48-4.

Reference:
Patent; UCB PHARMA S.A.; WO2008/132139; (2008); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

2265-91-0, name is 1,3-Difluoro-5-iodobenzene, belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 1,3-Difluoro-5-iodobenzene

General procedure: In a microwave tube, 425 mg of (S)-2-morpholin-4-yl-8-trifluoromethyl-6,7,8,9-tetrahydropyrimido[1,2-a]pyrimidin-4-one (Example 1e) are introduced into 1 ml of dimethylformamide, 422 mg of tripotassium phosphate, 380 mg of copper iodide and 2 ml of iodobenzene. The mixture obtained is heated in a microwave oven for 30 minutes at 150 C. The reaction mixture is then centrifuged. The separated supernatant is then rinsed with ethyl acetate and then evaporated to dryness. The residue is taken up with ethyl acetate and the solution obtained is washed with water. The organic phase is separated and then dried over magnesium sulphate, filtered, and concentrated under vacuum. After purification by silica chromatography (gradient of 5% to 15% of the eluent CH2Cl2/MeOH/NH4OH 28% 38/17/2 in dichloromethane), 150 mg of (8S)-2-(morpholin-4-yl)-9-phenyl-8-(trifluoromethyl)-6,7,8,9-tetrahydro-4H-pyrimido[1,2-a]pyrimidin-4-one are obtained The product is prepared according to the procedure described in Example 12, but using 250 mg of (8S)-2-morpholin-4-yl-8-trifluoromethyl-6,7,8,9-tetrahydropyrimido[1,2-a]pyrimidin-4-one (Example 1e), 276 mg of 1,3-difluoro-5-iodobenzene, 349 mg of tripotassium phosphate, 156 mg of copper iodide and 93 mg of (1S,2S)-cyclohexane-1,2-diamine. After 1 hour at 150 C. under microwave irradiation and silica column purification of the reaction mixture (elution gradient of CH2Cl2 to CH2Cl2/MeOH 98/02), 91 mg of (8S)-9-(3,5-difluorophenyl)-2-(morpholin-4-yl)-8-(trifluoromethyl)-6,7,8,9-tetra-hydro-4 H-pyrimido[1,2-a]pyrimidin-4-one are obtained in the form of an ochre foam

The synthetic route of 2265-91-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sanofi; Baku, Eritsuku; Bulolo, Morice; Cross, Annie; El Amado, Youssef; Fuiroshiyu, Lom Brunnow; Array, Frank; Carlson, Carl Andreas; Marciniak, Gilbert; Ronan, Baptiste; Shio, Laulan; Bibe, Bertrand; Viviani, Fabrice; Zimerman, Andre; (90 pag.)JP5655070; (2015); B2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 90347-66-3 as follows. COA of Formula: C9H9IO2

To the oil of Step 1 in THF, copper iodide (1.1 g, 5.74 mmol, 0.1 eq) and tetrakis (triphenylphosphine) palladium (3.3 g, 2.86 mmol, 0.05 eq) was added. The solution was purged with nitrogen 3 times. To the solution triethylamine (11.57 g, 114.28 mmol, 2.0 eq) and trimethylsilylacetylene (8.4 g, 85.71 mmol, 1.5 eq) was added. Then the solution obtained was stirred at room temperature for 24 hours, evaporated to dryness under reduced pressure and the title product was isolated by column chromatography as a yellow oil.

According to the analysis of related databases, 90347-66-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Si Chuan University; Yang, Shengyong; Wei, Yuquan; (168 pag.)US2017/305920; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 191348-14-8, name is 2-Iodo-4-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2-Iodo-4-methoxyaniline

Under anhydrous and anaerobic conditions, 0.1 mmol of 2-iodo-4-methoxyaniline, 0.12 mmol of 3-fluoro-4-methoxybenzaldehyde, 0.3 mmol of selenium powder, 0.005 mmol of copper, 0.2 mmol of potassium hydroxide and 10 ml were added. DMSO solution in a single-mouth round bottom flaskIn the reflux reaction at 120 C, the reaction was monitored by TLC, and the pure methoxy-containing benzoselenazole compound was obtained by column chromatography.The product was demethylated with boron tribromide (6 eq.) to give the product as a white solid.The yield was 28%.

The synthetic route of 2-Iodo-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wuhan University; Zhou Haibing; Zhang Silong; Hu Zhiye; Li Yuanyuan; Ning Wentao; Dong Chune; (13 pag.)CN108863985; (2018); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 25309-64-2,Some common heterocyclic compound, 25309-64-2, name is 1-Ethyl-4-iodobenzene, molecular formula is C8H9I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 250 mL 3 -neck round bottom flask equipped with a thermometer and a magnetic stirring bar was charged with 4.01 g (61.3 mmol) of zinc dust and 35 mL of dimethylformamide (DMF) under a nitrogen atmosphere. The slurry was treated with 0.56 g (2.2 mmol) of iodine. The red disappeared in 90 seconds. The reaction mixture was treated with 6.00 mL (8.18 g, 42.0 mmol) of ethyl 4-bromobutyrate and heated to 800C for 4 hour. The reaction mixture was cooled to 300C and treated with 4.98 g (21.5 mmol) of 4-iodoethylbenzene and 0.48 g (0.9 mmol) of dichlorobis(triphenylphosphine)nickel(II). The reaction mixture was heated to 45C for 80 hours. The cooled reaction mixture was treated with aqueous 4% hydrochloric acid to quench the excess zinc. The mixture was extracted with methyl t-butyl ether (MTBE) (1 X 60 mL). The organic phase was washed with brine (1 X 30 mL), dried over sodium sulfate and concentrated. The crude ethyl 4-(4-ethylphenyl)butyrate was taken up in ethanol, treated with 20 mL of 2N aqueous sodium hydroxide, and heated to reflux. After 4 hours the reaction mixture was cooled to 25C and washed with MTBE (2 X 30 mL). The aqueous phase was acidified with aqueous 4% hydrochloric acid. A solid was isolated by filtration to give 1.99 g of 4-(4-ethylphenyl)butanoic acid. IH NMR (d6- DMSO): delta 11.9, bs, IH (COOH); delta 6.98, d, 2H, (arylH’s); delta 6.95, d, 2H (arylH’s); delta 2.41, m, 4H, (CH2’s alpha to aryl); delta 2.07, t, 2H (CH2 alpha to COOH); delta 1.64, m, 2H (CH2 beta to both aryl and COOH); delta 1.03, t, 3H (CH3). 13C NMR (d6-DMSO): 174.23, 141.08, 138.67, 128.20, 127.65, 33.97, 33.03, 27.73, 26.35, 15.65.

The synthetic route of 25309-64-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EMISPHERE TECHNOLOGIES, INC.; WO2008/112368; (2008); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 628-21-7, name is 1,4-Diiodobutane, molecular formula is C4H8I2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 1,4-Diiodobutane

To a solution of 5-bromo-7-chloro-2-[(4-methoxyphenyl)methyl]isoindolin-1-one (1, 0.4 g, 1.09 mmol) in tetrahydrofuran (25 mL) at room temperature was added sodium hydride (131 mg, 5.45 mmol). The reaction was stirred for 30 min and then 1,4-diiodobutane (2, 1691 mg, 5.45 mmol) was added to the reaction mixture. The reaction was stirred at room temperature for an additional 5 h. After completion, the reaction mass was quenched with a cold saturated solution of ammonium chloride at 0 C. The residue was dissolved in ethyl acetate (100 mL) and the organic layer was washed with water (2¡Á20 mL) then with brine (10 mL). The organics were separated and dried using magnesium sulfate before concentration to dryness. The crude was then purified by flash column chromatography using 10% ethyl acetate in hexane as the eluant. The desired fractions were concentrated to dryness under vacuum to afford 5?-bromo-7?-chloro-2?-[(4-methoxyphenyl)methyl]spiro[cyclopentane-1,3?-isoindoline]-1?-one as a yellow solid. Yield: 0.21 g, 45%; MS (ESI) m/z 422.2[M+1]+; 1H NMR (400 MHz, CDCl3) delta 7.54 (s, 1H), 7.40 (s, 1H), 7.26 (d, J=8.10 Hz, 2H), 6.83 (d, J=8.10 Hz, 2H), 4.64 (s, 2H), 3.95 (s, 3H), 2.17-1.72 (m, 8H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 628-21-7, its application will become more common.

Reference:
Patent; EFFECTOR THERAPEUTICS, INC.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; (55 pag.)US2017/121339; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 34270-90-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 34270-90-1, name is 1-Iodo-2-(2-iodoethoxy)ethane, This compound has unique chemical properties. The synthetic route is as follows.

Step 2: To a 1 L flask filled with 2-chloroethylether (7 mL, 60 mmol) and acetone (280 mL) was added sodium iodide (45 g, 300 mmol). The reaction was heated at reflux under nitrogen for 7 d. The reaction was filtered and the filtrate was concentrated to yield crude 1-iodo-2-(2-iodoethoxy)ethane.To a mixture of 1-iodo-2-(2-iodoethoxy)ethane (848 mg, 2.6 mmol), LHMDS (5 mL, 1.0 M), and THF (5 mL) was added a solution of methyl 1-benzyl-4-(cyanomethyl)-1H-pyrrole-2-carboxylate (500 mg, 2.0 mmol) in THF (2.5 mL). The reaction was complete after stirring at room temperature for 15 min. An aqueous solution of saturated ammonium chloride was added followed by ethyl acetate and water. The mixture was extracted with ethyl acetate (1¡Á) and the combined organic extracts were washed with brine (1¡Á), dried over magnesium sulfate, and concentrated. The crude product was purified by chromatography on silica gel (0-50% ethyl acetate/hexane) to yield the pure methyl 1-benzyl-4-(4-cyanotetrahydro-2H-pyran-4-yl)-1H-pyrrole-2-carboxylate. MS: (M+H)+=324.8.

The chemical industry reduces the impact on the environment during synthesis 1-Iodo-2-(2-iodoethoxy)ethane. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Wyeth; US2009/137554; (2009); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 391211-97-5, name is 3,4-Difluoro-2-((2-fluoro-4-iodophenyl)amino)benzoic acid, A new synthetic method of this compound is introduced below., Safety of 3,4-Difluoro-2-((2-fluoro-4-iodophenyl)amino)benzoic acid

To a stirred mixture of 3,4-difluoro-2-[(2-fluoro-4-iodophenyl)amino] benzoic acid (12 g, 30.5 mmol), prepared using procedures similar to those described in US 7,019,033, in dichloromethane (70 mL) at 0 C was added pyridine (2.5 mL, 30.8 mmol) followed by dropwise addition of cyanuric fluoride (2.8 mL, 33.6 mmol). The reaction mixture was stirred at 0 C for 10 minutes and then warmed to room temperature and stirred for 2 hours. The reaction mixture was diluted with water and extracted with dichloromethane (100 mL). The aqueous layer was extracted once with dichloromethane (50 mL). The combined organic layers were washed with saturated aqueous sodium bicarbonate solution, brine, dried over anhydrous sodium sulfate and concentrated in vacuo to give crude product as a brownish solid. Crude product was purified by flash chromatography (plug, 25% ethyl acetate in hexanes) to afford 3,4-difluoro-2-[(2-fluoro-4-iodophenyl)amino] benzoyl fluoride as a beige solid (11.8 g, 97% yield). 1H NMR (400MHz, CD3OD): 8.41 (s, IH), 7.80-7.81 (m, IH), 7.52 (dd, IH), 7.43-7.47 (m, IH), 6.96-7.03 (m, IH), 6.85-6.92 (m, IH).

The synthetic route of 391211-97-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EXELIXIS, INC.; WO2008/76415; (2008); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 25309-64-2, These common heterocyclic compound, 25309-64-2, name is 1-Ethyl-4-iodobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred solution of aryl halides (2.0 mmol) and thiourea (1.2 equiv) in dry DMSO (2.0 mL) at rt was added nano CuO (5.0 mol %) followed by Cs2CO3 (2.0 equiv) and heated at 110 C for 15 h. The progress of the reaction was monitored by TLC. After the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (20 mL) was added. The combined organic extracts were dried with anhydrous Na2SO4. The solvent and volatiles were completely removed under vacuum to give the crude product, which was purified by column chromatography on silica gel (petroleum ether/ethyl acetate, 9:1) to afford the corresponding coupling product in excellent yields.Recycling of the catalyst:after the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (2.0 mL) was added and CuO was removed by centrifugation. After each cycle, the catalyst was recovered by simple centrifugation, washing with deionized water and ethyl acetate and then drying in vacuo. The recovered nano CuO was used directly in the next cycle.Data of representative examples:Dip-tolylsulfane (Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Bis(4-ethylphenyl)sulfane (Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Bis(3-nitrophenyl)sulfane (Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.4,4′-Thiodianiline (Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Dithiophen-3-ylsulfane (Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Dipyrimidin-5-ylsulfane (Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; found: C, 50.45; H, 3.13; N, 29.41; S, 16.81.Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; f…

Statistics shows that 1-Ethyl-4-iodobenzene is playing an increasingly important role. we look forward to future research findings about 25309-64-2.

Reference:
Article; Reddy, K. Harsha Vardhan; Reddy, V. Prakash; Shankar; Madhav; Anil Kumar; Nageswar; Tetrahedron Letters; vol. 52; 21; (2011); p. 2679 – 2682;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com