Iodides-buliding-blocks

Reference of 181765-86-6, A common heterocyclic compound, 181765-86-6, name is Methyl 5-bromo-2-iodobenzoate, molecular formula is C8H6BrIO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[Intermediate 1-a] was synthesized according to Scheme 1 below.Methyl 5-bromo-2-iodobenzoate (25.0 g, 73 mmol) in a 500 mL round bottom flask reactorAdd 4-dibenzofuranboronic acid (18.7g, 88mmol), tetrakis (triphenylphosphine) palladium (1.7g, 0.15mmol), potassium carbonate (20.2 g, 146.7mmol), 125mL toluene, 125mL tetrahydrofuran 50 mL of water was added thereto.The temperature of the reactor was raised to 80 degrees and stirred for 10 hours. After the reaction was completed, the temperature of the reactor was lowered to room temperature, extracted with ethyl acetate, and the organic layer was separated.The organic layer was concentrated under reduced pressure and separated by column chromatography to obtain Intermediate 1-a (75.0 g, 60.1%).

The synthetic route of 181765-86-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SFC Ltd.; Cha Sun-uk; Jeong Gyeong-seok; Song Ju-man; Lee Yu-rim; Park Sang-u; Kim Hui-dae; Park Seok-bae; (65 pag.)KR2019/111856; (2019); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 116632-39-4, name is 5-Bromo-2-iodotoluene, molecular formula is C7H6BrI, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: iodides-buliding-blocks

Apparatus set-up: (0305) A 5 L 3 -necked round-bottomed flask, equipped with a mechanical overhead stirrer, reflux condenser, nitrogen inlet and exhaust. (0306) Experimental Procedure: (0307) Intermediate 3 (128 g, 0.435 mol) and intermediate 4 (128.8 g, 0.435 mol) were taken in toluene (1 L) and ethanol (1 L). (0308) Sodium carbonate solution (161.3 g, 1.522 mol, dissolved in 500 mL of water) was added. (0309) The reaction mixture was degassed with nitrogen for an hour. (0310) PdCl2 (PPh3)2 (15.2 g, 0.021 mol) was added and heated at 80 C for 18 h. (0311) After completion of the reaction, the mixture was filtered through a Florosil-silica plug and concentrated. (0312) The residue was dissolved in ethyl acetate (2 L), washed with water (1 L), brine (1 L), dried over sodium sulphate and concentrated. (0313) The crude product (159 g) was purified by silica column chromatography using 5 to 6 % ethyl acetate in hexane as an eluent to get 65 g of Intermediate B with 81 % HPLC purity. It was again purified by reverse phase column chromatography (in 5 g per run) using water/ acetonitrile as an eluent to get 35.6 g of Intermediate B. (0314) The material was dissolved in dichloromethane (500 mL), heated to 45 C, filtered the hot solution and concentrated to get 35 g of Intermediate B with 99.64 % HPLC purity as viscous oil. (0315) ^-NMR (400 MHz, COCh): delta [ppm] 2.29 (s, 3H), 7.19 (d, = 8.0 Hz, 1H), 7.37 – 7.42 (m, 3H), 7.47 – 7.52 (m, 2H), 7.61 (d, / = 8.4 Hz, 2H), 7.86 (s, 1H), 7.96 (d, = 7.6 Hz, (0316) 1H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 116632-39-4, its application will become more common.

Reference:
Patent; CAMBRIDGE DISPLAY TECHNOLOGY LIMITED; SUMITOMO CHEMICAL CO., LTD; HUMPHRIES, Martin; TARRAN, William; KAMTEKAR, Kiran; STACKHOUSE, Philip; LEE, James; (76 pag.)WO2017/153731; (2017); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 5876-51-7,Some common heterocyclic compound, 5876-51-7, name is 5-Iodobenzo[d][1,3]dioxole, molecular formula is C7H5IO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00230] To 27.7 mg PdCl2(dppf).CH2Cl2 in a reaction tube under nitrogen were added 4 ml dioxane, 0.14 ml (1.0 mmol) of 2,6-dimethylpiperidine, 0.23 ml (1.5 mmol) pinacolborane (crimson solution) and 261 mg (1.05 mmol) 1-iodo-3,4-methylenedioxybenzene. The crimson reaction solution was warmed to 80 C. with stirring in an oil bath. Analysis of the reaction solution by gc, as described above, was carried out at intervals (see Table 19.1). The reaction is fast and is complete after 4 h reaction time. The initial reaction rate with 1 mmol of 2,6-dimethylpiperidine as base exceeds that found using 3 mmol of triethylamine (see Table 17.3; catalyst not activated prior to reaction) and the final product distribution is essentially the same. This is not the case if one compares the reactions in which either 1 mmol of 2,6-dimethylpiperidine or 1 mmol of triethylamine is used as base. As noted above, dehalogenation in reactions using 1 mmol of triethylamine is considerable (23% of peak area in the gc is due to 1,3-benzodioxole) and the desired product, the pinacol ester of 3,4-methylenedioxyphenylboronic acid is only 69% of peak area. [00231] The results are different when 3 mmol of 2,6-dimethylpiperidine is used in the reaction. The reaction rate is reduced, especially after the first 1 to 2 hours (see Table 19.2). The results suggest that in situ catalyst activation may be initially enhanced using 2,6-dimethylpiperidine but excess of this base also retards the reaction. Dehalogenation occurs predominantly during the earlier part of the reaction. [TABLE-US-00007] TABLE 19.1 Rate of product formation on reaction of 1-iodo-3,4-methylenedioxybenzene with pinacolborane at 80 C., catalyst PdCl2(dppf).CH2Cl2, base 2,6-dimethylpiperidine (1.0 mmol). The concentrations are expressed in area % (uncorrected for response factors) determined by gc analysis of aliquots of the reaction solution taken at selected reaction times*. Reaction Time (h) [C00047] [C00048] [C00049] [C00050] 1 8.7 2 70 20 2 8.4 4.3 42 44 3 8.5 6.2 16 67 4 11.5 6.5 0.3 80 5 11.6 6.4 0 80 *The reaction was quenched at the selected reaction time by addition of the aliquot of reaction solution to a water/ethyl acetate mixture. [TABLE-US-00008] TABLE 19.2 Rate of product formation on reaction of 1-iodo-3,4-methylenedioxybenzene with pinacolborane at 80 C., catalyst PdCl2(dppf).CH2Cl2, base 2,6-dimethylpiperidine (3.0 mmol). The concentrations are expressed in area % (uncorrected for response factors) determined by gc analysis of aliquots of the reaction solution taken at selected reaction times*. Reaction Time (h) [C00051] [C00052] [C00053] [C00054] 1 8.9 1.3 69 20 2 9.2 2.8 49 38 3 9.6 3.5 33 53 4 11 5.1 25 58 5 10 5.6 18 66 6 10 5.9 13 71 25.5 12 6.1 2.2 78 *The reaction was quenched at the selected reaction time by addition of the aliquot of reaction solution to a water/ethyl acetate mixture.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Iodobenzo[d][1,3]dioxole, its application will become more common.

Reference:
Patent; Commonwealth Scientific and Industrial Research Organisation; US6680401; (2004); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 32024-15-0, name is 3-Iodo-4,5-dimethoxybenzaldehyde, A new synthetic method of this compound is introduced below., Computed Properties of C9H9IO3

General procedure: 3-Iodo-4,5-dimethoxybenzaldehyde (1.5 mmol) and 2,4-dimethyl-3-ethylpyrrole (3.3 mmol) were dissolved in absolute CH2Cl2 (30 mL) under N2 atmosphere, 10 drops of TFA were added and the solution was stirred at rt overnight or until TLC analysis showed complete consumption of the aldehyde. At this time of DDQ (2.5 mmol) were added and stirring continued for 20 min. Then, Et3N (4 mL) and BF3¡¤OEt2 (4 mL) were added. The mixture was stirred for 12 h then the organic layer containing the crude product was subsequently washed three times with water; the organic solution was dried over Na2SO4, and evaporated to dryness. The raw material was chromatographed (SiO2, petroleum ether/CH2Cl2, 6:4) affording 280 mg (yield: 33%) of 1a in the form of orange needles

The synthetic route of 32024-15-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Banfi, Stefano; Nasini, Gianluca; Zaza, Stefano; Caruso, Enrico; Tetrahedron; vol. 69; 24; (2013); p. 4845 – 4856;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 6293-83-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6293-83-0, name is 2-Iodo-4-nitroaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

In a 20 mL dehydrated deoxygenated Schlenk tube, acetophenone p-toluenesulfonylhydrazone(0.30 mmol, 86.4 mg), 2-iodo-4-nitroaniline (0.2 mmol, 52.8 mg), bis triphenylphosphine palladium(0.02 mmol, 14.0 mg), sodium tert-butoxide (1.2 mmol, 115.2 mg) 3.0 mL diethylene glycol dimethyl ether (diglyme), and finally 0.1 MPa of CO2 was injected into the reaction tube. The sealed reaction tube was heated and stirred in an oil bath at 140 C for about 24 hours Rear. The reaction solution was acidified with 1.5 mL of a 1 M hydrochloric acid solution and extracted with ethyl acetate (4 mL x 5) The organic phases were combined and finally the product was purified by column chromatography and then dried to give 23.9 mg of a white solid powder as a solid45%

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodo-4-nitroaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Changzhou University; Sun, Song; Cheng, Jiang; Hu, Weiming; Gu, Ning; Wang, Bingbing; (12 pag.)CN106432074; (2017); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 624-76-0, The chemical industry reduces the impact on the environment during synthesis 624-76-0, name is 2-Iodoethanol, I believe this compound will play a more active role in future production and life.

Method B): R-lipoyl chloride (10.0g, 44.5mmol) and tetrahydrofuran (200mL) were added to the reaction flask, stirringN, N-dimethylaniline (16.2 g, 133.5 mmol) was added to the solution. The mixture was cooled in an ice bath and 2-iodoethanol (17.6 g, 102.3 mmol)The reaction mixture was reacted at 50 C for 3h. After treatment and purification, the crude product was recrystallized from a mixed solvent of ethyl acetate and n-hexane,R-lipoic acid was 2-iodoethyl ester, light yellow solid (14.1 g), yield 88%, the reaction formula is:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoethanol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Suzhou Fushilai Pharmaceutical Co., Ltd.; Mo Guoning; (9 pag.)CN107089967; (2017); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5876-51-7, name is 5-Iodobenzo[d][1,3]dioxole belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C7H5IO2

[00212] 8.1 mg of Pd(OAc)2 (0.036 mmol) and 16 mg (0.033 mmol) of bis(1,2-diphenylarsino)ethane were placed in a reaction tube under nitrogen together with 4 ml of dioxane and 0.45 ml of triethylamine. The tube was heated in an oil bath at 80 C. for 15.5 h and the yellow solution became brown in colour. Then added at room temperature 262 mg (1.06 mmol) of 1-iodo-3,4-methylenedioxybenzene and 0.22 ml (1.5 mmol) of pinacolborane. The reaction mixture was then warmed to 80 C. After 3 h, 45% of the total peak areas was due to the desired product. This increased to 73% after 24 h.

The synthetic route of 5876-51-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Commonwealth Scientific and Industrial Research Organisation; US6680401; (2004); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 25245-27-6, name is 1-Iodo-3,5-dimethoxybenzene, A new synthetic method of this compound is introduced below., Computed Properties of C8H9IO2

General procedure: A mixture of the styrene (3 mmol), the halogenated benzene (3 mmol), triethanolamine (3 mmol) and Pd (II) acetate (0.03 g) was stirred under argon at 100 C for 24 h. The reaction was cooled to 25 C, quenched by the addition of dil. aq. hydrochloric acid (2 N, 10 ml), and extracted with ether (3 ¡Á 100 ml). The organic phases were dried (Na2SO4), the solvents evaporated, and the crude product was subjected to chromatography (silica gel, hexane/ethyl acetate mixtures).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Csuk, Rene; Albert, Sabrina; Siewert, Bianka; Schwarz, Stefan; European Journal of Medicinal Chemistry; vol. 54; (2012); p. 669 – 678;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 216393-67-8, name is 4-Chloro-2-fluoro-6-iodoaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C6H4ClFIN

General procedure: To a 50 mL oven-dried flask containing a magnetic stirring bar, Pd(PPh3)2Cl2 (14.0 mg, 0.02 mmol, 1.0 mol %), CuI (2.0 mg, 0.01 mmol, 0.5 mol %), 4-(tert-butyl)-2-iodoaniline (550.0 mg, 2.0 mmol), 2 (317.0 mg,2.2 mmol) [26], and Et3N (10 mL) were added in sequence under argon atmosphere at room temperature. The resulting reaction mixture was stirred for 5 h, then the reaction mixture was filtered through a shortpad of celite, and the solid was washed with EtOAc (20 mL). The combined organic phase was concentrated under reduced pressure, andthe residue was purified by column chromatography on silica gel(eluent: petroleum ether/ethyl acetate=10:1) to afford pure product4c in 75% yield.

The synthetic route of 216393-67-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chang, Sai-Lan; Qiu, Li-Hua; Sun, Ru; Yang, Ling; Ge, Jian-Feng; Dyes and Pigments; vol. 160; (2019); p. 58 – 63;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 31599-61-8,Some common heterocyclic compound, 31599-61-8, name is 4-Iodo-1,2-dimethylbenzene, molecular formula is C8H9I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An appropriate phenylacetamide (0.12 mmol, 1 equiv), an appropriate iodo compound (0.48 mmol, 4 equiv), Pd(OAc)2 (2.7 mg, 10 mol%), and AgOAc (50 mg, 0.3 mmol, 2.5 equiv) in anhydrous toluene (3 mL) was heated at 110 C for 24 h under a nitrogen atmosphere. After the reaction period, the solvent was evaporated in vacuo to afford a crude reaction mixture. Purification of the crude reaction mixture by column chromatography furnished the corresponding arylated products 4a-q/7a-f (bis arylation products), 3o,r/6a,b/8e,f/9a,b (mono arylation products) (see corresponding Tables/Schemes for specific examples and reaction conditions).

The synthetic route of 31599-61-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Bisht, Narendra; Babu, Srinivasarao Arulananda; Tetrahedron; vol. 72; 39; (2016); p. 5886 – 5897;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com