Iodides-buliding-blocks

Application of 20555-91-3,Some common heterocyclic compound, 20555-91-3, name is 1,2-Dichloro-4-iodobenzene, molecular formula is C6H3Cl2I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of CuI (95.2 mg, 0.50 mmol), CsF (91.1 mg, 0.60 mmol), 4-iodobenzonitrile (1a,114.0 mg, 0.50 mmol), and THF (1.0 mL) was added [(trimethylsilyl)difluoromethyl]phosphonate (2,156.2 mg, 0.60 mmol) at room temperature. The reaction mixture was stirred at 60 C in an atmosphere of nitrogen for 24 h and quenched with water. The aqueous layer was extracted with ethyl acetate.Then, the combined organic phase was washed with water, dried over anhydrous Na2SO4. The crude product was purified by column chromatography on silica gel (hexane/EtOAc = 2/1) to give 3a(121.4 mg, 0.42 mmol, 84%) as a pale-yellow oil.

The synthetic route of 20555-91-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Komoda, Kazuki; Iwamoto, Rei; Kasumi, Masakazu; Amii, Hideki; Molecules; vol. 23; 12; (2018);,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 29289-13-2, These common heterocyclic compound, 29289-13-2, name is 2-Iodo-4-methylaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 2-iodoaniline 1 (0.50 mmol) and Pd/C (10 wt% palladium on activated carbon paste and 50% moisture, 10 wt% wet Pd/C based on starting material 1) in 1,4-dioxane (3 mL) was added into a Schlenk flask (25 mL) and stirred at r.t. Ethyl acrylate (100 mg, 1.0 mmol, 2.0 equiv) and Et3N (101 mg, 1.0 mmol, 2.0 equiv) were added and the mixture was stirred at 100 C until the reaction was complete. The solvent was evaporated under reduced pressure and the residue was purified by column chromatography.

The synthetic route of 29289-13-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhou, Xiao-Yu; Chen, Xia; Wang, Liang-Guang; Synthesis; vol. 49; 24; (2017); p. 5364 – 5370;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 6293-83-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6293-83-0 name is 2-Iodo-4-nitroaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

iV-Benzyl-5-bromo-2-iodobenzamide (805 mg, 1.93 mmol), 2-iodo-4-nitroaniline (425 mg, 1.61 mmol), copper(I) iodide (123 mg, 0.65 mmol), and potassium carbonate (1.11 g, 8.0 mmol) were taken up in anhydrous DMSO (11 mL). The resulting reaction mixture was first stirred at 80C for 2 hr, followed by heating to 135 C for another 16 hr. After cooling to room temperature, the mixture was diluted with an excess of Et20 and washed with water. The organic layer was dried over Na2S04, filtered and concentrated. The residue was purified by Hash column chromatography (EtOAc : Hex ::: 0 : 100 to 100 : 0) to give 10- henzyl -2-bromo-8-mtro-5, 10-dihydro- 1 li ~dibenzo[b,e] [ 1 ,4] diazepin-11 -one (179 mg, 26 %).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Iodo-4-nitroaniline, and friends who are interested can also refer to it.

Reference:
Patent; DANA-FARBER CANCER INSTITUTE, INC.; GRAY, Nathanael S.; DE CLERCQ, Dries; JANG, Jaebong; JANNE, Pasi; TO, Ciric; ECK, Michael; PARK, Eunyoung; HEPPNER, David; (0 pag.)WO2019/164947; (2019); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 64248-58-4, name is 1,2-Difluoro-4-iodobenzene, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C6H3F2I

Add bis (triphenylphosphine) palladium (II) dichloride (49 mg, 0. 07 mmol), copper (I) iodide (28 mg, 0. 15 mmol), and 3-chloro-5-ethynylpyridine, (prepared as described in PREPARATION 27), (200 mg, 1. 5 mmol) to a solution of 1, 2-difluoro-4-iodobenzene (420 mg, 1. 7 mmol) in triethylarnine (3. 1 mL, 22 mmol) and heat at 60 C for 16 h. Cool to room temperature and concentrate. Purify the residue by silica gel chromatography, eluting with a gradient of 50 : 50 to 100 : 0 dichloromethane : hexanes, followed by a second silica gel chromatography, eluting with 95 : 5 to 85 : 15 hexanes : ethyl acetate to give the title compound as a white solid (320 mg, 88%). 1H NMR (300 MHz, Cd13) 8 7. 14-7. 23 (m, 1H), 7. 28-7. 40 (m, 2H), 7. 76-7. 82 (t, J = 2. 0 Hz, 1H), 8. 51-8. 55 (d, J = 2. 3 Hz, 1H), 8. 59-8. 62 (d, J = 1. 8 Hz, 1H), MS (APCI) : m/z= 250 [M+H] +.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 64248-58-4.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/94822; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 289039-20-9, name is 5-Bromo-2-iodobenzamide, molecular formula is C7H5BrINO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 289039-20-9

STEP 2. Preparation of (4-Bromo-1,1′-biphenyl-2-yl)methylamine Palladium(0) tetrakis(triphenylphosphine) (2.6 g, 2.2 mmol) was added to a stirred solution of 5-bromo-2-iodobenzamide (14.1 g, 43.3 mmol), phenyl boronic acid (5.3 g, 43.3 mmol), and potassium carbonate (24.4 g, 176.8 mmol) in degassed dimethylformamide (100 mL). The reaction was refluxed overnight under N2(g). The brown solution was cooled and filtered through Celite. The solution was diluted in ethyl acetate, washed with water, 1 N HCl, saturated sodium bicarbonate, and saturated NaCl, dried (magnesium sulfate), filtered, and concentrated under reduced pressure to a tar. Flash chromatography (silica, 50% ethyl acetate/hexane) gave a tan solid (2.4 g). The biphenyl amide was dissolved in tetrahydrofuran (20 mL), and BH3-THF (1N, 20 mL, 20 mmol) was added slowly. The reaction was refluxed overnight under N2. The reaction was cooled to 0 C. and quenched with ethyl acetate resulting in gas evolution. After gas evolution ceased, the organics were washed with water, saturated sodium bicarbonate, saturated NaCl, dried (sodium sulfate), filtered, and concentrated yielding (4-bromo-1,1′-biphenyl-2-yl)methylamine as a gray semi-solid (2.4 g). ESI MS m/z 262.0/264.0 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 289039-20-9, its application will become more common.

Reference:
Patent; John, Varghese; Hom, Roy; Sealy, Jennifer; Tucker, John; US2006/14737; (2006); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

627-31-6, name is 1,3-Diiodopropane(stabilized with Copper chip), belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C3H6I2

Example 39 l-(2-[(2,6-difluorophenyl)methoxyl-l,l,l,3,3,3-hexafluoropropan-2-yl|-4-[l-(4- fluorobenzenesulfonyl)cyclobutyl”|benzene Sodium hydride (14.75 mg, 0.369 mmol, 60%> suspension in mineral oil) was added to a solution of l,3-difluoro-2-(((l,l,l,3,3,3-hexafluoro-2-(4-(((4- fluorophenyl)sulfonyl)methyl)phenyl)propan-2-yl)oxy)methyl)benzene (20 mg, 0.037 mmol) and 1,3-diiodopropane (10.91 mg, 0.037 mmol) in Nu,Nu-dimethylformamide (1 mL). After 1 h at room temperature, saturated ammonium chloride (2 mL) and ethyl acetate (15 mL) were added. The mixture was washed with water (2×5 mL), brine (5 mL), dried (magnesium sulfate), filtered and concentrated under reduced pressure. The crude material was purified via preparative LC/MS with the following conditions: Column: Waters XBridge CI 8, 19 x 150 mm, 5-muiotaeta particles; Mobile Phase A: 5:95 acetonitrile: water with 10-mM ammonium acetate; Mobile Phase B: 95:5 acetonitrile: water with 10-mM ammonium acetate; Gradient: 40-100% B over 15 minutes, then a 5-minute hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation to give Example 39 (13.2 mg, 62% yield). LC/MS (M+18): 600.1; LC retention time: 2.296 (analytical HPLC Method B); 1H NMR (500 MHz, 1 : 1 mixture of CDCI3-CD3OD) delta ppm 7.56 (d, J=8.4 Hz, 2H), 7.50 – 7.41 (m, 1H), 7.38 – 7.30 (m, 2H), 7.19 (d, J=8.4 Hz, 2H), 7.11 – 6.97 (m, 4H), 4.70 (s, 2H), 3.27 (ddd, J=13.9, 9.9, 5.9 Hz, 2H), 2.81 – 2.67 (m, 2H), 2.45 – 2.30 (m, 1H), 2.13 – 1.97 (m, 1H).

The synthetic route of 627-31-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; DUAN, Jingwu; DHAR, T. G. Murali; JIANG, Bin; LU, Zhonghui; KARMAKAR, Ananta; GUPTA, Arun Kumar; WEIGELT, Carolyn A.; WO2015/103508; (2015); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 14452-30-3, A common heterocyclic compound, 14452-30-3, name is 1-(3-Iodophenyl)ethanone, molecular formula is C8H7IO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of CuI (Sigma-Aldrich, 0.025 mmol, 5 mol%), anhydrousK3PO4 (0.65 mmol), 2-mercaptobenzimidazole (0.5mmol), DMSO (0.2 mL), and aryl halide (0.75 mmol) were addedto a reaction vial and a screw cap was fitted to it. The reactionmixture was stirred under air in a closed system at 100 C for24 h. The heterogeneous mixture was subsequently cooled toroom temperature and diluted with dichloromethane. The combinedorganic extracts were dried with anhydrous Na2SO4, andthe solvent was removed under reduced pressure. The crudeproduct was loaded into the column using minimal amounts ofdichloromethane and was purified by silica gel column chromatographyto afford the S-arylated product. The identity andpurity of products was confirmed by 1H NMR and 13C NMRspectroscopic analysis

The synthetic route of 14452-30-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tan, Bryan Yong-Hao; Teo, Yong-Chua; Synlett; vol. 29; 15; (2018); p. 2056 – 2060;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5471-81-8, name is Methyl 4-iodo-3-methylbenzoate, A new synthetic method of this compound is introduced below., Recommanded Product: 5471-81-8

Under the protection of inert gas,Pd(OAc)2 (2.2 mg, 10 mol%), XPhos (19.1 mg, 20 mol%), NBE-CO2K (3.5 mg, 10 mol%) were added to a 4.0 mL reaction flask which was dried and equipped with a magnetic stir bar.Methyl 3-methyl-4-iodobenzoate (0.2 mmol, 1.0 equiv.),Phenyl glycidyl ether (0.6 mmol, 3.0 equiv.) and dry N-methylpyrrolidone (1.0 mL). The reaction flask was capped and stirred at room temperature for about 5 minutes, after which the mixture was heated to 80 C and stirred for 24 hours. After cooling the reaction vessel to room temperature, it was quenched with water (10 mL).Extracted with methyl tert-butyl ether (3 ¡Á 10 mL), dried with Na 2 SO 4Filter and concentrate under vacuum. Purified by column chromatography,The eluent is petroleum ether: ethyl acetate = 10:1 (v/v),49 mg of methyl 7-methyl-2-(phenoxymethyl)-2,3-dihydrobenzofuran-5-carboxylate (white solid, yield 82%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Wuhan University; Zhou Qianghui; Wu Chenggui; Cheng Honggang; (20 pag.)CN108329285; (2018); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 19099-54-8, name is 1-Iodo-2-isopropylbenzene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19099-54-8, COA of Formula: C9H11I

0.3 mmol of sodium carbonate and 0.1 mmol of 1,2-bis(4-methoxyphenyl)acetylene,Tetrakis(triphenylphosphine palladium) 0.005 mmol, bis(2-diphenylphosphinophenyl)ether 0.005 mmol,0.2 mmol of 4-(carboxylate)phenyl)boronic acid, 0.3 mmol of 2-isopropyliodobenzene, and 1 mL of N,N-dimethylformamide were added to a 15 mL reaction tube.Nitrogen was repeatedly filled 10 times, placed in an oil bath at 120 C, and reacted for 24 hours;Cooled to room temperature, the reaction was diluted with ethyl acetate, washed with water three times, the organic phase dried over anhydrous Na2SO4, filtered, and concentratedPurification by thin layer chromatography gave 29 mg of the desired product (yield: 59%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Huaqiao University; Cheng Guolin; Lv Weiwei; (20 pag.)CN109879713; (2019); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 847685-01-2, The chemical industry reduces the impact on the environment during synthesis 847685-01-2, name is 4,5-Difluoro-2-iodoaniline, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of the appropriate ortho-iodoaniline (5 mmol), pyruvic acid (1.04 mL, 15 mmol), DABCO (1.683 g, 15 mmol) and Pd(OAc)2 (56 mg, 0.25 mmol) in dry DMF (15 mL) was degassed 3 times and then was stirred at 105C for 16 h. The mixture was cooled to room temperature, neutralized with 10% aqueous hydrochloric acid and extracted with EtOAc (3?15 mL). The combined organic phases were washed with brine, dried over anhydrous Na2SO4, filtered and concentrated in vacuo. The crude product was purified by flash column chromatography using 95/5 EtOAc/MeOH and recrystallized from EtOH to yield the 1H-indole-2-carboxylic acid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Difluoro-2-iodoaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kumar, Nag S.; Amandoron, Emily A.; Cherkasov, Artem; Brett Finlay; Gong, Huansheng; Jackson, Linda; Kaur, Sukhbir; Lian, Tian; Moreau, Anne; Labriere, Christophe; Reiner, Neil E.; See, Raymond H.; Strynadka, Natalie C.; Thorson, Lisa; Wong, Edwin W.Y.; Worrall, Liam; Zoraghi, Roya; Young, Robert N.; Bioorganic and Medicinal Chemistry; vol. 20; 24; (2012); p. 7069 – 7082;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com