Iodides-buliding-blocks

Related Products of 153898-63-6, The chemical industry reduces the impact on the environment during synthesis 153898-63-6, name is 2-Iodo-5-methoxyaniline, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of 2-iodoanilines (1.0 mmol), THF (3 mL), and t-BuOK (3 mmol) was stirred in a 10-mL sealed Schlenk tube for 5 min, and then dimethylthiocarbamoyl chloride (1.2 mmol) and CuBr (10 mol %) were added. The reaction mixture was heated at 60 C until completion as indicated by TLC. Then the mixture was cooled down to room temperature and quenched with sat. NH4Cl solution (5 mL). The aqueous phase was extracted with EtOAc (3 x10 mL). The combined organic phases were dried (Na2SO4), and the solvent was removed under reduced pressure. The obtained crude product was purified by flash column chromatography.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodo-5-methoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Chang, Cai-Zhu; Xu, Wan; Zeng, Meng-Tian; Liu, Min; Liu, Xing; Zhu, Hui; Dong, Zhi-Bing; Synthetic Communications; vol. 47; 13; (2017); p. 1262 – 1267;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 31599-60-7, These common heterocyclic compound, 31599-60-7, name is 1-Iodo-2,3-dimethylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1-iodo-2,3- dimethylbenzene (8) [prepared according to Chen, Y et al. Org. Lett. 2007, 9, 1899] (1 .93 g, 8.32 mmol) in carbon tetrachloride (40 mL) was added NBS (3.67 g, 20.62 mmol), AIBN (0.070 g, 0.43 mmol) and the resulting mixture was gently refluxed by irradiation with a halogen lamp (500 W) for 4 h. The precipitate was filtered and washed with a small amount of carbon tetrachloride. The filtrate was concentrated under reduce pressure, the obtained residue was dissolved in EtOAc ( 1 00 ml), successively washed with 10% NaOH solution (20 mL), water (2 x 20 ml), 10% Na2S203 solution (20 mL), water (20 mL), brine (20 raL), and dried (Na2SC>4). The solvent was evaporated and the residue was purified by column chromatography on silica gel (eluent petroleum ether) to give 1 .89 g (58.3%) of compound 9. NMR (CDC13) delta: 7.84 (dd, J=8.1 , 1 .1 Hz, 1 H), 7.33 (dd, J=7.6, 1 .1 Hz, l H), 6.97 (t, J=7.8 Hz, 1 H), 4.85 (s, 2H), 4.66 (s, 2H). The product contained ca. 15-20% of an inseparable impurity (supposedly l -bromo-2,3-bis(bromomethyl)benzene).A mixture of 1,2-bis(bromomethyl)-3-iodobenzene (9) (2.50 g, 6.41 mmol), diethyl 2-acetamidomalonate (1 .39 g, 6.41 mmol), and K2C03 (2.22 g, 1 6.06 mmol) in acetonitrile (40 mL) was refluxed for 70 h. The mixture was allowed to cool to ambient temperature, the precipitate was filtered and washed with a small amount of acetonitrile. The filtrate was concentrated under reduce pressure, the obtained residue was dissolved in EtOAc (100 mL), washed successively with saturated NaHC03 solution (30 mL), water (2 x 30 mL), brine (30 mL), and dried (Na2S04). The solvent was evaporated and the residue was purified by column chromatography on silica gel (eluent petroleum ether-ethyl acetate, gradient from 20: 1 to 20:6) to give 2 g of oil. The oil was dissolved in diethyl ether and kept in a refrigerator overnight. The precipitate was filtered and dried to give 0.4 g (14%) of a regioisomer diethyl 2-acetyl-5-iodo-l ,4-dihydroisoquinoline-3,3(2H)-dicarboxylate. NMR (CDC13) delta: 7.76 (d, J=8.0 Hz, 1H), 7.13 (d, J=7.5 Hz, 1 H), 6.94 (t, J = 7.7 Hz, 1H), 4.65 (s, 2H), 4.19 (q, J=7.1 Hz, 2H), 4.16 (q, J=7.1 Hz, 2H), 3.56 (s, 2H), 2.28 (s, 3H), 1 .22 (t, J=7.1 Hz, 3H), 1.22 (t, J=7.1 Hz, 3H). LCMS (ESI) m/z: 446 [M+H]+. The filtrate was evaporated and the residue was purified by column chromatography on silicagel (eluent petroleum ether-ethyl acetate, gradient from 20: 1 to 20:6) to give 0.95 g (33.2%) of compound (10).A solution of diethyl 2-acetyl-8-iodo-l,4-dihydroisoquinoline-3,3(2H)-dicarboxylate (10) (0.585 mmol) in 6 N HQ (10 mL) was refluxed for 5 h. The mixture was cooled and cone. NH4OH water solution was added until pH of the medium was ~7. The precipitate was filtered, washed with a small amount of water, and dried to give 0.305 g (76.7%) of compound (11). Because of a low solubility of the product in common deuterated organic solvents and deuterium oxide, the NMR spectrum was not informative. LCMS (ESI) m/z: 304 [M+H]+. The product contained ca. 15-20% of an inseparable impurity (supposedly the corresponding bromo derivative 8-bromo-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid). LCMS (ESI) m/z: 256 [M+H]+.To a suspension of 8-iodo-l ,2,3,4-tetrahydroisoquinoline-3-carboxylic acid (11) (0.645 g, 2.13 mmol) in methanol ( 1 8 mL) slowly SOCI2 ( 1.07 ml, 14.92 mmol) was added within 10 min. The reaction mixture was stirred at room temperature for 16 h, evaporated, and the residue was dissolved in a mixture of IN NaHC03 solution (30 mL) and EtOAc (50 mL). The organic layer was separated and the aqueous layer was extracted with EtOAc (2 ^ 15 mL). The organic extracts were combined, washed successively with water (20 mL), brine (20 mL), and dried (Na2S04). The solvents were evaporated to give compound 12 (0.570 g, 84%) which was used in the next step without further purification. NMR (CDCI3) delta: 7.67 (d, J=7.8 Hz, IH), 7.10 (d, J=7.5 Hz, I H), 6.87 (t, J=7.7 Hz, IH), 4.07 (d, 16.6 Hz, IH), 3.87 (d, J=16.6 Hz, I H), 3.78 (s, 3H), 3.71 (dd, J=9.4, 5.0 Hz, I H), 3.04 (dd, J=16.5, 5.0 Hz, IH), 2.97 (dd, J=l 6.5, 9.4 Hz, IH). LCMS (ESI) m/z: 318 [M+H]+. The product contained ca. 15-20% of an inseparable impurity (supposedly the corresponding bromo derivative methyl 8-bromo-1,2,3,4-tetrahydroisoquinoline-3-carboxylate). LCMS (ESI) m/z: 270 [M+H]+.A mixture of methyl 8-iodo-1, 2,3,4- tetrahydroisoquinoline-3-carboxylate (12) (0.570 g, 1 .8 mmol) and 2,3-dichloro-5,6-dicyano- 1 ,4-benzoquinone (DDQ) (0.449 g, 2.0 mmol) in toluene (20 mL) was refluxed for 6 h. To the reaction mixture was added another portion of DDQ (0.100 g, 0.45 mmol) and the refluxing was continued for 16 h. The mixture was allowed to cool to room temperature; the precipitate was filtered and washed with a small amount of toluene. The filtrate was evaporated and the residue was purified by column chromatography on silicagel (eluent petroleum ether-ethyl acetate, gradient from 100:0 to 100: …

The synthetic route of 31599-60-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LATVIAN INSTITUTE OF ORGANIC SYNTHESIS; JIRGENSONS, Aigars; LOZA, Einars; CHARLTON, Michael; FINN, Paul William; RIBAS DE POUPLANA, Lluis; SAINT-LEGER, Adelaide; (76 pag.)WO2016/129983; (2016); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 103962-05-6, name is 1-Iodo-4-(trifluoromethoxy)benzene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 103962-05-6, name: 1-Iodo-4-(trifluoromethoxy)benzene

General procedure: A Schlenk tube was charged with a mixture of tetrahydroberberrubine (1, 228 mg,0.70 mmol), potassium carbonate (97 mg, 0.70 mmol), copper(I) iodide (13 mg,0.07 mmol), picolinic acid (17 mg, 0.14 mmol), aryl iodide (1.40 mmol, 2 equiv) andDMSO (6 mL) before it was evacuated and backfilled with N2 for three times. Thereaction mixture was stirred for 24 h at 100 C and the resulting mixture was subjectedto column chromatography (SiO2, CH2Cl2/MeOH 200:1-150:1) to give the respectiveproduct 2a-o as pale-yellow solids and 4 as yellow solid. Characterization data and theoriginal spectra are presented below.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Teng, Qiaoqiao; Zhu, Xinhui; Guo, Qianqian; Jiang, Weihua; Liu, Jiang; Meng, Qi; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 1575 – 1580;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 31827-94-8, name is 2-Bromo-1-(4-iodophenyl)ethanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H6BrIO

General procedure: All 1-substituted 2-hydroxy-2-aryl-2,3-dihydro-imidazo[1,2-a]pyrimidinium salts were synthesized by using previously described protocols.41 A general procedure is described below (with compound 79 as an example): In a 30 mL microwave vial were successively brought acetonitrile (15 mL), N-(1,3-benzodioxol-5-ylmethyl)pyrimidin-2-amine (1.15 g, 5 mmol), 4-fluorophenacylbromide (1.3 g, 6 mmol, 1.2 equiv), and a catalytic amount of4-dimethylaminopyridine (6 mg, 0.05 mmol). The reaction tube was sealed and irradiated in a microwave reactor at a ceiling temperature of 80 C at 150 W maximum power for 30 min. After the reaction mixture was cooled with an air flow for 15 min, the precipitate was washed with acetone (25 mL), ether (20 mL) and dried in vacuum to afford 79 (1.98 g, 89% yield) as a white powder.

The synthetic route of 2-Bromo-1-(4-iodophenyl)ethanone has been constantly updated, and we look forward to future research findings.

Reference:
Article; Steenackers, Hans P.L.; Ermolat’Ev, Denis S.; Savaliya, Bharat; Weerdt, Ami De; Coster, David De; Shah, Anamik; Van Der Eycken, Erik V.; De Vos, Dirk E.; Vanderleyden, Jozef; De Keersmaecker, Sigrid C.J.; Bioorganic and Medicinal Chemistry; vol. 19; 11; (2011); p. 3462 – 3473;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19718-49-1, name is Methyl 4-amino-3-iodobenzoate, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 19718-49-1

A combined suspension of methyl 4-amino-3-iodobenzoate (2,72 g, 9.83 mmol), copper (_) iodide (37 mg, 0.20 mmol), bis(triphenylphosphine)palladium(II) dichloride (138 mg, 0.20 mmol), and tert-butyl((4-ethynylbenzyl)oxy)dimethylsilane (2.91 g, 11.79 mmol) were stirred in toluene and TEA (1/1, 82 mL) at ambient temperature for overnight. The reaction solvent was evaporated under reduced pressure, and the residue was purified by column chromatography with hexane/ethyl acetate (7/1, v/v) to obtain the compound 62 as a brown solid (3.89 g, quant. yield):

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 19718-49-1.

Reference:
Patent; BOARD OF REGENTS, THE UNIVERSITY OF TEXAS SYSTEM; DALBY, Kevin N.; EDUPUGANTI, Ramakrishna; TALIAFERRO, Juliana; LEE, Juhyeon; (0 pag.)WO2018/160967; (2018); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 6940-76-7, These common heterocyclic compound, 6940-76-7, name is 1-Chloro-3-iodopropane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of ethyl 3-oxobutanoate (1.95 g, 14.98 mmol) in tetrahydrofuran (20 mL) was added dropwise to a stiired 1 M solution of lithium diisopropylamine (30 mL, 30 mmol) at-78 C. The solution was stirred for an additional hour at-78 C, and then a solution of 1-chloro-3-iodopropane (3.07 g, 15.02 mmol) in tetrahydrofuran (50 mL) was added. The resulting solution was allowed to warm to room temperature and stirred for an additional two hours. Water was added, and the mixture was extracted twice with ethyl acetate. The combined organic layers were dried (Na2SO4) and concentrated. The resulting residue was purified via MPLC eluting with a gradient of 20-50% ethyl acetate in petroleum ether to afford ethyl 7-chloro-3-oxoheptanoate (2.8 g, 90%) as an oil.

The synthetic route of 6940-76-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LYCERA CORPORATION; AICHER, Thomas, Daniel; TAYLOR, Clarke, B.; VANHUIS, Chad, A.; WO2015/171610; (2015); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 148836-41-3, name is 1-Bromo-4-chloro-2-iodobenzene, A new synthetic method of this compound is introduced below., Product Details of 148836-41-3

Step B: Preparation of l -Bromo-4-chloro-2-(3,3,3-triethoxyprop- l -ynyl)benzene; [08941 lambda mixture of l -bromo-4-chloro-2-iodoben/cne ( 1 0 g. 32 mmol) in 100 mL degassed ACN and TEA (29 g. 284 mmol), was treated with 3.3,3- triethoyprop- l -ync (6.0 g, 35 mmol), copper(l) iodide (0.60 g. 3.2 mmol), and dichltheta.Obis(triphenylphosphine)palladium(H) ( 1. 1 g, 1 .6 mmol). The mixture was stirred at room temperature for 2 hours at room temperature (the mixture turned dark green after 5 minutes). TLC showed that all starting material was converted, and a new spot was produced. The mixture was concentrated in vacuo. The residue was diluted with 100 ml. ether, washed with H2O (2 20 mL), 5% ammonia water (2 x 20 ml.), brine (20 ml.), dried over anhydrous Na2SO4, and concentrated in vacuo. The crude product was purified by column chromatography pretreated with TEA and eluted with 0-15 % EtOAc/hexane to give 7.6 g of the product as a pale yellow oil. The oil solidified after it was stored in the refrigerator.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; AMGEN INC.; WO2008/76427; (2008); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 20555-91-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20555-91-3, name is 1,2-Dichloro-4-iodobenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 8-aminoquinoline (0.4mmol), an appropriate carbonyl chloride (0.4mmol), an appropriate aryl iodide (0.16-0.24mmol, 4-6 equiv), Pd(OAc)2 (10mol %) and Ag2CO3 (0.6-0.8mmol, 1.5-2 equiv) was heated in o-xylene (2mL) at 110 C for an appropriate reaction period (12-36 h). Then, reaction mixture was cooled to rt and the solvent evaporated in vacuo to give the crude product, which was purified by chromatography to give the corresponding C-H arylated products (see the respective Tables 1-4/Scheme 2 for the specific entries and reaction conditions).

The synthetic route of 1,2-Dichloro-4-iodobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mohan, Sruthi; Gopalakrishnan, Bojan; Babu, Srinivasarao Arulananda; Tetrahedron; vol. 72; 39; (2016); p. 5853 – 5863;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 77317-55-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 77317-55-6, name is Methyl 2-amino-5-iodobenzoate belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A mixture of CuI (110 mg, 0.58 mmol), Pd(OAc)2 (60 mg, 0.27 mmol), and Ph3P (130 mg, 0.49 mmol) in MeCN (30 mL) deaerated (UST) under argon atmosphere was stirred at 20 C for 20 min. Iodide 6 (1.39 g, 5.0 mmol), Et3N (1.53 g, 15.11 mmol, 2.1 mL), H2O (0.15 g, 8.33 mmol), and finely ground CaC2 (1.0 g, 15.60 mmol) were then added. The reaction mixture was stirred for 7 h and concentrated in vacuo; the residue was extracted with hot EtOAc. The extract was filtered and concentrated in vacuo, the residue was purified by chromatography on SiO2 using gradient elution of PhH -> PhH/EtOAc (4 : 1). Diarylalkyne 2a (0.57 g, 70%) was isolated as yellow crystals, m.p. 245-249 C. HRMS (ESI), found m/z: 325.1179, 347.0997; C18H16N2O4; calculated 325.1183 [M + H]+, 347.1002 [M + Na]+. IR (KBr), nu/cm-1:788, 834, 985, 1103, 1162, 1235, 1300, 1430, 1506-1663, 1688, 2342, 2361, 2838-3033, 3367, 3464. 1H NMR (DMSO-d6), delta: 3.82 (s, 6 H, 2 MeO); 6.75 (d, 2 H, HC(5), HC(5), J = 8.6 Hz); 7.26 (dd, 2 H, HC(4), HC(4), J = 8.6 Hz, J = 1.9 Hz); 7.83 (d, 2 H, HC(2), HC(2), J = 1.9 Hz). 13C NMR (DMSO-d6), delta: 51.3 (Me, Me); 86.9 (CC); 108,8 (C(5), C(5)); 109.0 (C(3), C(3)); 116.9 (C(1), C(1)); 133.9 (C(2), C(2)); 136.0 (C(4), C(4)); 150.8 (C(6), C(6)); 167.1 (CO, CO).

The synthetic route of Methyl 2-amino-5-iodobenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lozanova; Stepanov; Mel?nik; Zlokazov; Veselovsky; Russian Chemical Bulletin; vol. 68; 1; (2019); p. 64 – 67; Izv. Akad. Nauk, Ser. Khim.; 1; (2019); p. 64 – 67,4;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 452-82-4,Some common heterocyclic compound, 452-82-4, name is 1-Fluoro-2-iodo-4-methylbenzene, molecular formula is C7H6FI, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 8A 4-fluoro-3-iodobenzaldehyde A mixture of 4-fluoro-3-iodotoluene (5.0 g, 21.2 mmol) and NBS (4.2 g, 23.3 mmol) in 50 mL of CCl4 was refluxed under N2 with benzoyl peroxide (250 mg, 1.03 mmol) was heated for 3 hours. The reaction mixture was cooled to room temperature and filtered through celite, washed with benzene. The filtrate was evaporated and pumped to give the benzylbromide as a crude light brown oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Fluoro-2-iodo-4-methylbenzene, its application will become more common.

Reference:
Patent; Xin, Zhili; Liu, Gang; Pei, Zhonghua; Szczepankiewicz, Bruce G.; Serby, Michael D.; Zhao, Hongyu; US2004/167188; (2004); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com