Iodides-buliding-blocks

Adding a certain compound to certain chemical reactions, such as: 887266-99-1, name is 3-Fluoro-4-iodobenzonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 887266-99-1, COA of Formula: C7H3FIN

General procedure: The tetrazole compounds were prepared by a modified literature reported protocol.3 Thus, the aromatic nitrile (1.0 equiv), TBAF.3H2O (0.5 equiv) and TMS-N3 (1.5 equiv) were taken in a screw capped vial equipped with a magnetic stirrer and the resulting mixture was stirred vigorously at 85 oC. The reaction mixture was then transferred to a seperatory funnel and TBAF was removed by washing the organic phase with 1M aqueous HCl solution (20 ml). The organic phase was separated, washed with brine (20 ml) and dried over Na2SO4 and then concentrated in a rotary evaporator. The products were then purified by silica-gel (60-120 mesh) column chromatography or for some cases by recystallisation. Compound 2L was used as a crude mixture for further reaction. The compounds were then characterized by IR, NMR spectroscopy and mass spectrometry. Compounds 2A-B and 2H are reported compounds3 whereas 2C- 2G and 2I- 2L are new.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Bag, Subhendu Sekhar; Talukdar, Sangita; Anjali; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2044 – 2050;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 608-28-6, name is 2-Iodo-1,3-dimethylbenzene, This compound has unique chemical properties. The synthetic route is as follows., Safety of 2-Iodo-1,3-dimethylbenzene

General procedure: Heck coupling reactions were carried out using aryl iodides (3a-j) (1 mmol), 2-Vinyl-N-Boc-piperidine (2) (1.2 mmol), and Et3N as base (2 mmol) dissolved in 10 ml of aq.ethanol (water/ethanol = 9:1). An appropriate amount of NHC precursor (i) (0.1 mmol), Pd(OAc)2 (0.05 mmol), and TBAB (0.025 mmol) were added to this mixture. The reaction mixture was heated to 80 C for 5 hrs. The coupled product was extracted with DCM (2 x 20 ml). The combined organic layers were dried (anhydrous Na2SO4) and evaporated under reduced pressure to afford a crude product which was subjected to column chromatography to afford pure E-Olefins (4a-j).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 608-28-6.

Reference:
Article; Kankala, Shravankumar; Kankala, Ranjith Kumar; Balaboina, Ramesh; Thirukovela, Narasimha Swamy; Vadde, Ravinder; Vasam, Chandra Sekhar; Bioorganic and Medicinal Chemistry Letters; vol. 24; 4; (2014); p. 1180 – 1183;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 98-61-3,Some common heterocyclic compound, 98-61-3, name is 4-Iodobenzenesulfonyl chloride, molecular formula is C6H4ClIO2S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 7 (1.0 eq) and triethylamine (3.5 eq) in dichloromethane (10 volume), substituted sulphonyl chloride (1.2 eq) was added at 5-10 C and stirred overnight at room temperature.The completion of the reaction was confirmed by TLC. The reaction mixture was poured into separating funnel washed with water followed by brine solution, dried over anhydrous sodium sulphate and concentrated to syrup. Crude syrup was purified by crystallization using dichloromethane and petroleum ether to yield the oxadiazole substituted sulfonamide as white to white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Iodobenzenesulfonyl chloride, its application will become more common.

Reference:
Article; Harish, Kikkeri P.; Mohana, Kikkeri N.; Mallesha, Lingappa; Prasanna Kumar, Basavapatna N.; European Journal of Medicinal Chemistry; vol. 65; (2013); p. 276 – 283;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6940-76-7, name is 1-Chloro-3-iodopropane, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 6940-76-7

General procedure: In a round flask 300 mg (1.18 mmol) of compound 1 are weighed and placed in an inert atmosphere with a magnetic stirrer. Then, 3 ml of dry THF are added and the system is cooled to 0 C. Then 1.2 equivalents of LDA are added and left in an ice bath for 10 minutes. The ice bath is removed and left under constant stirring for 2 hours. The round flask is cooled again to 0 C and 1,3-chloroiodopropane is added using a syringe previously purged with nitrogen. The ice bath is removed and the reaction is followed by TLC until the consumption of the starting material (1). Once the reaction (approximately 2.5 h) is finished, 0.5 ml of a saturated NH4OH solution is added and an extraction with 5 ml of dichloromethane is carried out in triplicate, the organic phase is collected and dried with anhydrous sodium sulfate, once dried the organic phase is distilled under vacuum. The purification is carried out by a chromatographic column using silica gel as a stationary phase and a mixture of Hexane and ethyl acetate in a proportion of 95:5. A pale yellow oil is obtained in all cases.

According to the analysis of related databases, 6940-76-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Xavier Dominguez-Villa, Francisco; Avila-Zarraga, Gustavo; Armenta-Salinas, Concepcion; Tetrahedron Letters; vol. 61; 15; (2020);,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 19094-56-5, These common heterocyclic compound, 19094-56-5, name is 2-Chloro-5-iodobenzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a dried flask, 5-iodo-2-chlorobenzoic acid (20.0 g, 70.8 mmol) and dichloromethane (60 mL) were added. The reaction mixture was stirred, then oxalyl chloride (9.8 g, 77.9 mmol) and DMF (0.2 mL) were slowly added dropwise, and some bubbles were observed. The reaction mixture was stirred at room temperature for 7 hours. The solvent and excess oxalyl chloride were removed by rotary evaporation to give a gray solid, which was used directly in the next step without further purification.

The synthetic route of 19094-56-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jiangsu Hansoh Pharmaceutical Co., Ltd.; ZHONG, Huijuan; LIAO, Jianchun; YU, Hongping; XU, Yaochang; LI, Qing; CHEN, Jianghua; GAO, Peng; TAN, Songliang; WANG, Shaobao; (45 pag.)US2016/222047; (2016); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 56096-89-0,Some common heterocyclic compound, 56096-89-0, name is 4-Fluoro-2-iodobenzoic acid, molecular formula is C7H4FIO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 5a (5.0 g, 18.8 mmol, 1.0 eq), 5b (4.60 g, 28.2 mmol, 1.5 eq), potassium carbonate (6.5 g, 47.0 mmol, 2.5 eq), copper powder (360.0 mg, 5.64 mmol, 0.3 eq), and Copper(I) oxide (810.0 mg, 5.64 mmol, 0.3 eq) in DMF (100.0 mL) was stirred at 140 C overnight under argon atmosphere, then cooled to room temperature. Water (50.0 mL) was added. The mixture was filtered through ceiite. The filtrate was acidified to pH===2 with 2 N HC1, then water (50.0 mL) was added. The resulting mixture was extracted with EtOAc (50 0 ml, x 3). The combined organic layers were washed with brine (20.0 mL x 5), dried over anhydrous NaiSOr and filtered. The filtrate was concentrated in vacuo to afford crude 5c (3.0 g, 54.0 %). LC/MS: 300.0 [M+H]+.

The synthetic route of 56096-89-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SILICON SWAT, INC.; CHAMBERLAIN, Brian T.; RICE, James M.; JERNIGAN, Finith E., III; SHERMAN, Woody; KULKARNI, Meghana M.; SHECHTER, Sharon; ALLEN, Bryce K.; TAN, Dazhi; MARINO, Kristen A.; LIN, Zhixiong; (292 pag.)WO2019/100061; (2019); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

444-29-1, name is 1-Iodo-2-(trifluoromethyl)benzene, belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1-Iodo-2-(trifluoromethyl)benzene

C. To a degassed sample of 4-methylenepiperidine-1-carboxylic acid tert- butyl ester (0.527 g, 2.67 mmol) was added 9-borabicyclic[3,3,1]nonane (5.6 mL of a 0.5 M solution in THF, 2.8 mmol). The resulting solution was refluxed for 1 hour. After cooling to ambient temperature, the solution was added to a mixture of 1-iodo-2- trifluoromethylbenzene (0.707 mg, 2.600 mmol), Pd-catalyst (3 molpercent), DMF (25 mL), water (1 mL), and K2CO3 (0.6 g). The resulting mixture was heated at 600C for 3 hours. The mixture was cooled to ambient temperature and then poured into water. The pH of the solution was adjusted to 11 with 10percent NaOH solution and the mixture was extracted with ethyl acetate. The combined organic extracts were washed with brine and dried over Na2SO4, filtered, and evaporated to give a crude oil, which was further purified by column chromatography to afford 4-(2- trifluoromethylbenzyl)piperidine-1-carboxylic acid te/t-butyl ester as a waxy solid (0.638 g) in 70 percent yield.

The synthetic route of 444-29-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; XENON PHARMACEUTICALS INC.; WO2006/34338; (2006); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 63262-06-6, name is 1,4-Dibromo-2,5-diiodobenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 63262-06-6

Under a nitrogen atmosphere, to a 50mL three-necked flask 1,4-dibromo-2,5-di-iodobenzene 219 mg (0.45 mmol) and diethyl ether (5 ml) was added and cooled to -78 C..Thereafter, it was added dropwise n- butyllithium 0.54ml at the same temperature (1.66 M hexane solution, 0.90 mmol), and stirred for 1 hour.At Thereafter the same temperature, it was added dropwise synthesized bis previous step was dissolved in diethyl ether (1ml) (2-n- hexyl-4-thienyl) disulfide 359 mg (0.90 mmol), and stirred at room temperature for 12 hours.The reaction by the addition of water was stopped, after extraction with diethyl ether, and the organic layer was dried over anhydrous sodium sulfate.And concentrated under reduced pressure, the resulting residue was purified by silica gel column chromatography (hexane), 1,4-bis [(2-n-hexyl-4-thienyl) sulfanyl] of 2,5-dibromobenzene yellow solid 228mg was obtained (80% yield).

The synthetic route of 63262-06-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TOSOH CORPORATION; HACHIYA, HITOSHI; WATANABE, MAKOTO; UEDA, SAORI; (16 pag.)JP2015/227297; (2015); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 123158-75-8, name is 4-Chloro-2-iodo-6-nitroaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Product Details of 123158-75-8

Preparation 41: 5-Chloro-3-phenyl-7-nitro-1H-indoleStep A: 5-Chloro-7-nitro-3-phenyl-2-trimethylsilyl-1H-indole; 2-Amino-5-chloro-3-nitro-phenyliodide (1.5 g, 4.90 mmol) prepared in Preparation 19 and 1-phenyl-2-trimethylsilylacetylene (4.3 g, 24.50 mmol) were dissolved in DMF (50 mL). Palladium acetate (0.11 g, 0.5 mmol), lithium chloride (0.21 g, 4.90 mmol) and triethylamine (2.48 g, 24.50 mmol) were added thereto, and the mixture was stirred under heating for 3 h to 100 C. After completion of the reaction, water was added to the reaction mixture, which was then extracted with ethyl acetate, washed with saturated aqueous sodium chloride solution, dried over anhydrous magnesium sulfate, and filtered. The solvent was removed under reduced pressure, and the residue was purified by column chromatography to give the title compound (1.05 g, Yield 87%).1H-NMR (400 MHz, CDCl3); delta 9.78(br s, 1H), 8.15(s, 1H), 7.78(s, 1H), 7.387.48(m, 5H), 0.26(s, 9H)

The synthetic route of 123158-75-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LG Life Sciences Ltd; US2010/197673; (2010); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 105202-02-6, name is 2-Iodo-5-(trifluoromethyl)aniline, A new synthetic method of this compound is introduced below., SDS of cas: 105202-02-6

General procedure: 2-aminobenzenethiol (10 g, 80mmol), 3, 4-difluorobenzonitrile (11.12, 80mmol) and ferric citrate (19.59g, 80mmol) were added in DMF (50.00 mL) at 25-30 0C. The reaction mixture was heated to 110C. Reaction mixture was monitored for the synthesis of compound 3 by TLC. (2ml of reaction mixture was withdrawn and separated in ethylacetate and water. Ethyl acetate solution concentrated and crystallised in isopropyl ether to give compound 3 for characterization). After completion of reaction by TLC, powdered potassium carbonate (16.58 g, 120mmol) was added to the solution and stirred for 1 hr. The mixture was heated to 110C till completion by TLC. After completion of reaction, the mass was cooled to 25-30 C. Ethyl acetate (150 mL) and DM water (150 mL) were added. Layers separated. Organic layer washed with water (150 mL), dried over sodium sulfate and concentrated. Isopropyl ether (IPE; 150 mL) was added to the slurry, filtered, washed with IPE. Dried under vacuum at 50 C (16.84g, 94%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Das, Tonmoy Chitta; Quadri, Syed Aziz Imam; Farooqui, Mazahar; Letters in Organic Chemistry; vol. 16; 1; (2019); p. 16 – 24;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com